MAX V1.01_20161226 ROM - SPFT version

bencebacsi Post time 2017-1-2 23:54:32 | Show all posts [Copy link]
36 10103
View: 10103|Reply: 36

MAX V1.01_20161226 ROM - SPFT version

[Copy link]
Post time 2016-12-30 13:42:58 | Show all posts |Read mode
This is the SP Flash Tool version of the
V1.01_20161226 firmware
for UMI MAX

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMI MAX receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.



Changelog:
  • Improved fingerprint scanner performance
  • Minor bug fixes



Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

ROM: 20161227_c239v55_kw_u11.rar - Extract the .rar file before use. The scatter file (MT6755_Android_scatter.txt) is inside the extracted folder, together with the other elements

SPFT: SP_Flash_Tool_v5.1648.rar (use this one instead of the old version linked in the UMI forum guide)

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe



Here's an optional solution to start the flashing process on your UMI MAX if the standard method doesn't work. It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMI MAX to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.


 Author| Post time 2017-1-29 08:58:28 | Show all posts
monkeyharris replied at 2017-1-29 04:18
UMI MAX receives all updates automatically via FOTA method

http://community.umidigi.com/thread-6170-1-1.html
The thread above is highlighted to be visible in every product category. Please read it.

1

threads

27

posts

204

credits

Platinum Member

Rank: 3Rank: 3

credits
204
Post time 2017-1-7 23:46:39 | Show all posts
Until few days the fingerprint scanner worked fine with 20161226. Now unfortunately once the scanner works fine, other time after one unrecognized scan it stops to work, need to unlock with pattern. After this works again. Sometimes, when I lock the screen with power button, it buzzes one time, after that it doesn't recognize the touches....   

0

threads

1

posts

13

credits

New Member

Rank: 1

credits
13
Post time 2017-1-7 17:53:35 | Show all posts
The fingerprint sensor doesn't work!
After flashing the rom, it worked a few times. But after that the same problem...
I lock the screen with a app.
I always need to return to 20160819 rom, because all other rom have this problem.
This is very dissapointing... I hope 7.0 will be fine, but when?

0

threads

34

posts

139

credits

Senior Member

Rank: 2

credits
139
Post time 2016-12-30 21:46:54 | Show all posts
Can it be installed manually via local update?
 Author| Post time 2016-12-30 21:55:13 | Show all posts
CzornyProrok replied at 2016-12-30 21:46
Can it be installed manually via local update?

No, it can be installed only with SP Flash Tool. You may install but don't need this version if you bought your phone before December. The next OTA update will be an Android 7.0 upgrade.

1

threads

27

posts

204

credits

Platinum Member

Rank: 3Rank: 3

credits
204
Post time 2016-12-31 19:16:57 | Show all posts
With this rom the fingerprint sensor is OK again! Thanks for your work!

4

threads

48

posts

267

credits

Platinum Member

Rank: 3Rank: 3

credits
267
Post time 2017-1-1 20:31:48 | Show all posts
i tested a rom,the fingerprint not work propetly on stand by phone vibrate and tell not reconized ...i try to calibrate nothing change
 Author| Post time 2017-1-1 21:43:02 | Show all posts
Donatelo92 replied at 2017-1-1 20:31
i tested a rom,the fingerprint not work propetly on stand by phone vibrate and tell not reconized .. ...

Please flash this ROM with the 'Firwmare Upgrade' option. If your hardware is intact, the fingerprint sensor works perfectly with this ROM.

4

threads

48

posts

267

credits

Platinum Member

Rank: 3Rank: 3

credits
267
Post time 2017-1-1 23:42:13 | Show all posts
now i'm on this version, V1.01_20161226 can be flash now with this option, and one bug no search contact must be found mannually thanks
Post time 2017-1-2 04:13:30 | Show all posts
Donatelo92 replied at 2017-1-1 23:42
now i'm on this version, V1.01_20161226 can be flash now with this option, and one bug no search con ...

Yes you can always flash any ROM with SPFT. If you are already with same build number while you flash you overwriting whole system and in case was there any error you fix this.
If you want search for contacts you can always open dialer and start typing in name or number and you should get searched contact list over dialer.

4

threads

48

posts

267

credits

Platinum Member

Rank: 3Rank: 3

credits
267
Post time 2017-1-2 04:22:38 | Show all posts
thanks, now finger work good... TY please fix for search contacts

4

threads

48

posts

267

credits

Platinum Member

Rank: 3Rank: 3

credits
267
Post time 2017-1-2 23:54:32 | Show all posts
UPDATE!! for ROM, fingerprint no work correct try with firmware update.. nothing change
1234Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list