Android 7 OTA update instaled (pics and first use)

MarcinP

Ok so I would recommend use SPFT and re-flash whole ROM. But firstly you can try factory reset. Settings - backup and reset - factory data reset

MarcinP

Go to settings - about phone - build number  and write to me this number

amigossvenchos

You can use two different Apps by deviding the screen.

This is the best feature so far.

ewarmou1

OvidiuP replied at 2016-12-23 02:10
Hi all,
i have some issues with the device after upgrade.

Yes I am getting the same resets They happen at different times and usually do not repeat, but a few times they repeated many times (the way I stopped the repeat was to power off the Plus). What is really the problem is that they occur during phone conversations. THe call does not drop, but no audio is present for the 15 seconds that it takes to finish the reset.  I have had many resets during fingerprint scanning to unlock, which seems very strange.

I used the FOTA/SPFT file to upgrade to N/7. Build number UMI PLUS V3.01_20161209.

I will try to reset the device to see if that fixes the problem, but if this keeps on happening I will have to downgrade to 6.

--
Ellsworth

OvidiuP

I've factory reset the phone and notice that it start resetting after I connect to Wifi.
Now I can use the phone, but only on cellular data and no Wifi.
I will try to downgrade to Android 6.
Does anyone know the topic on that?

Current build number: UMI PLUS V3.01_20161209
Custom Build Version: alps-mp-n0.mp7-V1_even6755.n

OvidiuP

I've flashed the device using http://community.umidigi.com/thread-5069-1-1.html
Everything is back to normal with Android 6.