This is the SP Flash Tool + OTA release of the V3.02_20170216 (Android 6.0.1) firmware for UMIDIGI Plus E
Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process! UMI Plus E receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.
UMIDIGI Plus E is not a different model, it's just a new brand. You can update your UMi Plus E smartphone with this ROM without risking its usability and without voiding your warranty. It is an official update for UMi Plus E.
If you are updating an earlier version, it is recommended to flash this ROM as 'Firmware Upgrade'!
Changelog: - January 2016 Google security patch applied
- Rebranding from UMi to UMIDIGI
- Minor bug fixes
-------------------------------------------------------------------------------- SP Flash Tool Resources:
>>>>> ROM: 20170217_g9v57_kw_u3_4m.rar <<<<< - Extract the .rar file before use. The scatter file (MT6757_Android_scatter.txt) is inside the extracted folder, together with the other components
Here's an optional solution to start the flashing process on your UMI(DIGI) Plus E if the standard method doesn't work. It's especially useful if your phone is bricked or is stuck in bootloop 1. Connect your UMI(DIGI) Plus E to USB. 2. Start the flashing process with the Download button in the flasher app. 3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds. 4. Wait until the flashing process finishes.
-------------------------------------------------------------------------------- OTA (recovery) update Manual (local) OTA update method instructions - Copy the downloaded .zip file to either the internal memory or the SD card of your phone
- Go to Settings --> About phone --> Wireless update
- Tap the 3-dot menu button at the top right corner and select Local updates
- Brows for the ...update.zip file and select it
- Tap Install now, comfirm the process with OK and wait until the process will be finished
>>>>> Update file for manual OTA update: UMDIGI_Plus_E_V3.02_20170216_update.zip <<<<<
Optional method (in case if the manual OTA update gets stuck): Install from recovery You need a microSD card (with at least 4GB capacity) installed in your phone! - Copy the ...update.zip file to your SD card
- Press and hold the volume-up and power buttons together until your phone restarts. It needs about 10 seconds or a little bit less if your phone was already powered off.
- When your phone is restarted, immediately release the power button but still hold the vol-up button until you see a lying android figure with an exclamation mark in red triangle on its tummy.
- Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
- Move to ‘Apply update from SD card’ and select it.
- On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
- After a succcessful installation you can read the ''Install from sdcard complete'' message and the recovery menu is available again.
- Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'
Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
|