This is the downloadable FOTA update file of the V3.01_20161209 Android 7.0 firmware for UMI Plus
UMI Plus receives all updates automatically via FOTA method. You need this update file only if you haven't received or - due to lack of internet access - cannot receive it automatically.
Manual (local) OTA update method instructions - Copy the downloaded .zip file to either the internal memory or the SD card of your phone
- Go to Settings --> About phone --> Wireless update
- Tap the 3-dot menu button at the top right corner and select Local updates
- Brows for the ...update.zip file and select it
- Tap Install now, comfirm the process with OK and wait until the process will be finished
Update file for manual OTA update: UMi_Plus_V3.01_20161213_update.zip Compatible with TWRP as well but cannot be installed on modified (ever rooted) systems
Optional method (in case if the manual OTA update gets stuck): Install from recovery You need a microSD card (with at least 4GB capacity) installed in your phone! - Copy the ...update.zip file to your SD card
- Press and hold the volume-up and power buttons together until your phone restarts. It needs about 10 seconds or a little bit less if your phone was already powered off.
- When your phone is restarted, immediately release the power button but still hold the vol-up button until you see a lying android figure with an exclamation mark in red triangle on its tummy.
- Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
- Move to ‘Apply update from SD card’ and select it.
- On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
- After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
- Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'
|