Super V3.02_20161017 ROM - SPFT + OTA release

bencebacsi Post time 2016-10-26 04:36:48 | Show all posts [Copy link]
80 25726
View: 25726|Reply: 80

Super V3.02_20161017 ROM - SPFT + OTA release

[Copy link]
Post time 2016-10-24 20:26:12 | Show all posts |Read mode
This is the SP Flash Tool + downloadable OTA release of the
V3.02_20161017 firmware
for UMI Super

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMI Super receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.



Changelog:
- Minor bug fixes
- Improved touchscreen sensitivity
- Improved fingerprint sensor performance



Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

ROM: 20161017_c239v55_kw_u1.rar - Extract the .rar file before use. The scatter file (MT6755_Android_scatter.txt) is inside the extracted folder, together with the other elements

SPFT: SP_Flash_Tool_v5.1640.rar (use this one instead of the old version linked in the UMI forum guide)



Here's an optional solution to start the flashing process on your UMI Super if the standard method doesn't work. It's especially useful if your phone is bricked or is stuck in bootloop.
1. Connect your UMI Super to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.


Manual (local) OTA update method instructions
1. Copy the downloaded .zip file to either the internal memory or the SD card of your phone
2. Go to Settings --> About phone --> Wireless update
3. Tap the 3-dot menu button at the top right corner and select Local updates
4. Brows for the ...update.zip file and select it
5. Tap Install now, comfirm the process with OK and wait until the process will be finished

Update file for manual OTA update: UMI_Super_20161017_c239v55_kw_u1_update.zip
Compatible with TWRP but cannot be installed on modified (ever rooted) systems

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card
  • Press and hold the volume-up and power buttons together until your phone restarts. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • When your phone is restarted, immediately release the power button but still hold the vol-up button until you see a lying android figure with an exclamation mark in red triangle on its tummy.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


super_8.png
Post time 2016-10-26 16:01:12 | Show all posts
As I wrote post about finger print performance in previous software threads but as I can see umi engineers not reading information from here.
I tested other softwares on umi phone and I found that there was (up to this software)  no problem with sensitivity of FINGER PRINT SENSOR!!!!!! Problem is with screen waking up speed.
When you touch finger print sensor vibration is coming on straight away but screen is waking up with delay. So conclusion is that finger print was 100% fine just screen waking up was the problem. Now umi changed sensitivity of finger print and is to sensitive!!!!!!!!

Comments

This version has problems with the Bluetooth in the car. You can make calls, but sometimes you can not play music. GPS has flaws in precision mode. Why did they remove the dual camera?  Post time 2016-12-4 08:29
Post time 2016-12-11 20:17:14 | Show all posts
qq76452664 replied at 2016-12-11 14:44
贴了钢化膜触摸不灵敏,不知道是手机问题还是手机本身问题,系统也有卡顿现象。
...

Sorry I don't understand. English please.

Comments

不会英语,用中国手机还要会英语吗?  Post time 2016-12-13 22:40

1

threads

10

posts

57

credits

Senior Member

Rank: 2

credits
57
Post time 2016-10-25 14:56:19 | Show all posts
Hello,
I'd received this version (V3.02_20161017) via FOTA. Nice, but I've noticed that there's a big bug: The fingerprint scanner goes constantly ''on'' and buzzing blocking the phone; therefore when you wanna open your phone you gotta wait mostly for 30 secs because ''you have tried too many times with the fingerprint scanner''. I had also reset my phone and the issue's still there. ANNOYING!!! What's going on here?...Do you have a solution for this issue? Thanx!

Comments

贴了钢化膜触摸不灵敏,不知道是手机问题还是手机本身问题,系统也有卡顿现象,你们手机有这现象吗?  Post time 2016-12-11 14:45
i have the same probleme...after every time the umi team release a update the phone get worst  Post time 2016-10-25 20:37

4

threads

35

posts

251

credits

Platinum Member

Rank: 3Rank: 3

credits
251
Post time 2016-10-26 22:46:54 | Show all posts
I restore my previous ROM and now works OK ... The last UPdate is a FingerPrint sensor madness .... Please UMI test your Update before send US ...

0

threads

3

posts

19

credits

New Member

Rank: 1

credits
19
Post time 2016-10-25 07:26:03 | Show all posts
Hello, my Phone is working great with the update.

But i do have suggestions for the next update:
The Harlekin Notification is glowing and it is off for minimum 2 seconds. So always looking at it i have to look at it a few seconds to be sure it's not in the glowing off position.
Another thing is the button on the left side: it starts the camera if i press it, nice. But with pressing it again it quits the camera instead of taking a picture.. Otherwise, keep up the great work

0

threads

10

posts

31

credits

New Member

Rank: 1

credits
31
Post time 2016-10-25 16:03:46 | Show all posts
Edited by skaynet89 at 2016-10-25 16:23 \n\nAfter the update, i have the same problem with the fingerprint sensor.  please do something with that!

"Improved fingerprint sensor performance" i think now is to high! the previous soft was much bether.

0

threads

10

posts

31

credits

New Member

Rank: 1

credits
31
Post time 2016-10-25 18:28:26 | Show all posts
cimoblas replied at 2016-10-25 14:56
Hello,
I'd received this version (V3.02_20161017) via FOTA. Nice, but I've noticed that there's a bi ...

try to do it manuali, download update on your phone and do it from local storage.

3

threads

32

posts

231

credits

Platinum Member

Rank: 3Rank: 3

credits
231
Post time 2016-10-25 20:43:04 | Show all posts
I think that UMI team must follow the example of the OnePlus team and relase a Community Build.

0

threads

10

posts

43

credits

New Member

Rank: 1

credits
43
Post time 2016-10-26 01:31:38 | Show all posts
Boa Tarde

Depois da atualização V3.02_20161017 o sensor biométrico esta ruim. Esta toda hora pedindo digital sozinho e quando vou ver ele esta contando os 30 segundos para liberar a tela.
Por favor façam uma atualização de correção rapidamente, pois isso já esta incomodando.

Thank You  

0

threads

28

posts

337

credits

Platinum Member

Rank: 3Rank: 3

credits
337
Post time 2016-10-26 02:12:51 | Show all posts
I have the same problem with the fingerprint sensor and a bug with the sync of widgets in desktop like Whatsapp and Google Calendar, these widgets doesn't update the information correctly and when you try to remove them the Launcher crash.

0

threads

6

posts

25

credits

New Member

Rank: 1

credits
25
Post time 2016-10-26 04:35:00 | Show all posts
cimoblas replied at 2016-10-25 14:56
Hello,
I'd received this version (V3.02_20161017) via FOTA. Nice, but I've noticed that there's a bi ...


Yes, I have the same problem. The fingerprint reader has gone mad, please correct the problem.

0

threads

6

posts

25

credits

New Member

Rank: 1

credits
25
Post time 2016-10-26 04:36:48 | Show all posts
skaynet89 replied at 2016-10-25 16:03
Edited by skaynet89 at 2016-10-25 16:23 \n\nAfter the update, i have the same problem with the fing ...



Yes, I have the same problem. The fingerprint reader has gone mad, please correct the problem.
12345678Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list