Applications close with an error. Umidigi Z1

mexanik240

When working with different applications, they are constantly closed and the system asks them to restart. These same additions to the Umi Pluse work work as if they were. On other devices, too. But most importantly the standard launcher is also closed. So now I could hardly pass to a third-party launcher. I reset the phone. So it behaves from the very purchase. I attach screenshots.

MarcinP

Just write here list of apps which making such issues.
I can only tell you that I never had such issues with all apps which I using.
Maybe you blocked some applications permissions caused this.
Please go to settings - apps - top right corner gear icon - apps permission also you can reset apps preferences in same menu (top right corner three dots)

mexanik240

Well, for example, your standard launcher3. This pre-installed launcher. He writes that the application is closed and so in the loop everything goes. With difficulty put the third-party launcher and phone at least as it began to work. The applications are so many and are randomly closed. For example Peebles. Flies constantly at the fact that in Umi Plus everything works. He did not make any restrictions or restrictions. And if in Umi Plus this happens once in a hundred years, then this phone is systematically and randomly. I think that there is a problem or an appart or very raw firmware.

mexanik240

Did what was recommended, did not help. Where to further dig?

MarcinP

mexanik240 replied at 2017-12-11 17:47
Did what was recommended, did not help. Where to further dig?

I think that you should use SPFT and flash complete ROM.
Unfortunately you will wipe all data from phone.
To do this please follow this SPFT instruction
http://community.umidigi.com/thread-11-1-1.html
Here you have all available ROMs
http://community.umidigi.com/forum-158-1.html
But before doing anything please change language to English to check is some errors with translation cause such issues.

mexanik240

I stitched my phone with the latest firmware. Here, the photonics says that the problem is in the firmware, and not how and where it is programmed. I think here it is necessary your programmers to dig where it climbs.

MarcinP

mexanik240 replied at 2017-12-12 15:52
I stitched my phone with the latest firmware. Here, the photonics says that the problem is in the fi ...

Did you change system language to English???

mexanik240

And how does the language relate to the work of the phone ??? Phone with the Russian firmware buggy, and changing the language, it will start working without interruption?

MarcinP

mexanik240 replied at 2017-12-13 16:30
And how does the language relate to the work of the phone ??? Phone with the Russian firmware buggy, ...

Explanation why, was in previous post.

MarcinP

mexanik240 replied at 2017-12-13 16:30
And how does the language relate to the work of the phone ??? Phone with the Russian firmware buggy, ...

Unfortunately I can only advise you to follow this post
http://community.umidigi.com/for ... &fromuid=242063