UMIDIGI S2 V1.0_20171027 ROM - SPFT release

bencebacsi Post time 2017-11-5 18:54:54 | Show all posts [Copy link]
50 7357
View: 7357|Reply: 50

UMIDIGI S2 V1.0_20171027 ROM - SPFT release

[Copy link]
Post time 2017-11-1 14:12:11 | Show all posts |Read mode
This is the SP Flash Tool release of the
V1.0_20171027 (Android 6.0.1) system software
for UMIDIGI S2

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI S2 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.





Changelog:
  • Bug fixed when charging was not possible if the device was turned off at a very low battery level
  • Audio jack disconnect bug in standby mode fixed
  • Optimized camera siganl amplifier
  • Optimized overall camera handling



--------------------------------------------------------------------------------
SP Flash Tool
Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)
Extract the .rar file before use. The scatter file (MT6757_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI S2 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI S2 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.



Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

2

threads

72

posts

563

credits

Administrator

Rank: 9Rank: 9Rank: 9

credits
563
QQ
Post time 2017-11-6 18:10:37 | Show all posts
wskiria1 replied at 2017-11-1 16:54
我是国内用户啊,好不容易找到了umi,我几年前使用过你们一款6.44寸那个手机。umi max
我最近在淘宝终于买 ...

S2 Root 教程:
1. 安装 Flashtool V.5.1728  http://www.mediafire.com/file/yw ... sh_Tool_v5.1728.rar
2. 电脑安装驱动 MTK_Driver_Auto_Installer_SP_Drivers_20160804  http://www.mediafire.com/file/cr ... rivers_20160804.exe
3. 下载 UMIDIGI_S2_CWM_notouch_recovery.img 并解压  http://www.mediafire.com/file/2c ... otouch_recovery.img
4. 下载 SuperSu Vers 2.82 并把它放入手机内置存储 https://redirect.viglink.com/?fo ... Fs...1705271822.zip
5. 打开Flashtool 选择recovery解压后的 scatter-loading 选择 download (手机连接电脑关机状态)
6. 手机断开电脑连接,同时按住音量上键和电源键,当出现手机log的时候松开电源键保持按住音量上键3秒。
7. 选择安装 "instal zip...", 接着选择从手机内部存贮选择安装包, 找到之前放的SuperSu Vers 2.82安装包,确认安装。之后选择重启手机。

Comments

Бо Translate almost in english please , most of us not are able to understand !  Post time 2017-11-7 02:02
Could you translate to english? :)  Post time 2017-11-6 23:13

0

threads

10

posts

70

credits

Senior Member

Rank: 2

credits
70
Post time 2017-11-1 15:08:22 | Show all posts
If you deploying a new patch why did not you added latest patches from Google? Is is still patch level January 2017

17

threads

199

posts

732

credits

Supor Moderator

Rank: 8Rank: 8

credits
732

UMIDIGI HeroMost Active UMIDIGIerWarmest Heart UMIDIGIerUMIDIGIerBest UMIDIGI ContributorModerator

Post time 2017-11-1 15:31:48 | Show all posts
@Ben,
what are the details of this new update?
Is possibile to receive the log file to understand the new fix and new details add in this new update firmware?
thanks a lot !

0

threads

1

posts

7

credits

New Member

Rank: 1

credits
7
Post time 2017-11-1 16:54:58 | Show all posts
我是国内用户啊,好不容易找到了umi,我几年前使用过你们一款6.44寸那个手机。umi max
我最近在淘宝终于买到了s2.但是不能root。论坛又不能发帖,所以在这里求助工程师

Comments

S2 Root 教程: 1. 安装 Flashtool V.5.1728 http://www.mediafire.com/file/yw ... sh_Tool_v5.1728.rar 2. 电脑安装驱动 MTK_Driver_Auto_Installer_SP_Drivers_20160804 http://www.mediafire.co...   Post time 2017-11-6 18:07

0

threads

9

posts

147

credits

Senior Member

Rank: 2

credits
147
Post time 2017-11-2 01:47:23 | Show all posts
My phone tried to install this OTA update.
Well after reboot it ended in an error and now phone is stuck in the boot.
It shows boot image and this is all. Nothing more.

I'll re-install it with this SPFT, I hope it will resurrect.

0

threads

6

posts

62

credits

Senior Member

Rank: 2

credits
62
Post time 2017-11-2 03:22:50 | Show all posts
US user here: I installed the new update this morning, great to see progress/bug fixes. My straight talk at&t sim is working flawlessly after it arrived today. To my disbelief, I currently have great signal and 4g!

Comments

Very nice, thank you for your feedback.  Post time 2017-11-2 16:40

1

threads

77

posts

1244

credits

Diamond Member

Rank: 4

credits
1244
Post time 2017-11-5 03:33:52 | Show all posts
When do we get android 7
Post time 2017-11-5 04:07:01 | Show all posts
tysontaps replied at 2017-11-5 03:33
When do we get android 7

Umidigi S2 with P20 SoC (first batches) will never get upgrade to next firmware.
Next batch with higher SoC will be coming with pre installed OS based on Android 7.

0

threads

40

posts

239

credits

Platinum Member

Rank: 3Rank: 3

credits
239
Post time 2017-11-5 18:52:12 | Show all posts
Edited by S11ton at 2017-11-5 18:54 \n\nHorrible video recording!

0

threads

40

posts

239

credits

Platinum Member

Rank: 3Rank: 3

credits
239
Post time 2017-11-5 18:54:54 | Show all posts
I see a slideshow 14 frames fer second and bitrate 10 Mbit per second instead of video in low light. And a lot of visual artifacts.
12345Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list