UMI SUPER replace screen version problem

lionedizampa

Hello,
I have a broken UMI Super display but , sinceit runs on android 7, all the kernel, and band versions DO NOT MATCH ANY OF AVAILIABLE REPLACEMENENTS???

So should I buy the one that is not for me or  open it and just rely on the display serial number...please help!!

MarcinP

Will be very hard to get older screen version so probably you need get latest one (this what is available) and update phone to latest firmware.

lionedizampa

Well I think my phone is currently on the latest version...android 7, i can check for updates if that is what You mean by "firmware".?

Thank You for reply!

MarcinP

lionedizampa replied at 2017-6-25 23:13
Well I think my phone is currently on the latest version...android 7, i can check for updates if tha ...

Firmware / ROM /software.
Go to settings - about phone - build number and compare to this software numbers
http://community.umidigi.com/forum-134-1.html

lionedizampa

I got my  new display and I am about  to put it on, as I am NO EXPERT, if it is not "PLUG N PLAY",

What and how should I get my UMI SUPER running?

I see here people  talking about flashing tools, and OTA updates,
I am not even sure which version I had last.
I know I did an update to android 7.....

Please give me some instructions!
THANX!!

MarcinP

lionedizampa replied at 2017-9-14 22:23
I got my  new display and I am about  to put it on, as I am NO EXPERT, if it is not "PLUG N PLAY",

...

Here is SPFT updating instruction
http://community.umidigi.com/thread-11-1-1.html
And here you can choose any ROM you want but I would recommend latest one. In each ROM you have SPFT tool, full ROM and drivers
http://community.umidigi.com/forum-134-1.html
Also you can firstly  replace screen and then if something will be wrong then use SPFT etc.
On YouTube you can find a lot different tutorials how to replace screen in umi super.

MarcinP

phrvo replied at 2017-9-30 21:39
Hi All,
I have to update the firmware of my UMI Super, as I had to change a broken screen.
All seems ...

You have all explanations on previous post. Open each link and read tutorials also download all needed apps and ROM from that links too.

MarcinP

phrvo replied at 2017-10-1 21:40
(Apparently) found a way to circumvent the disable driver signature enforcement
(YouTube here: https ...

Please try second last firmware.

gruut

Hello,

After change my screen with frame, I have my power button and the fingerprint doesn't work any more.
I can boot in factory mode but nothing more.
After turn ON by Reboot, the phone works fine but impossible to turn ON the screen with the button power.
I use the button volume to turn ON screen.
You have some solution to fix that, I don't think that my button was dead...
Thank you for you feed back.

Wooley4766

\n\n

phrvo replied at 2017-10-2 18:48
Hi,

Thanks for your reply,

Before u run flash tool disconnect fone, switch off, then run flashtool, download button.  Connect fone and flash starts automatically.