Screen replacement don't recognise proximity sensor

wolfspell

I had to replace my screen of the UMI super and now my phone don't recognise the proximity Sensor. When i try to calibrate give me a fail.

MarcinP

Reconnect old screen and test as maybe you something damaged during replacement.

gubby

does anybody know where i can get an umi super repaired i dropped it and glass smashed if anyone can help with a phone no or address for repair shop ,i live in  in rep of ireland thanks

MarcinP

gubby replied at 2017-6-1 23:30
does anybody know where i can get an umi super repaired i dropped it and glass smashed if anyone can ...

Basically umi doesn't have servicing centres only seller can provide warranty service.
But as you damaged your phone you can fix your self or buy parts and ask local smartphone shop or repairing centre for repair.
Here you can buy screen
https://m.aliexpress.com/search.htm?keywords=Umi+super+lcd+#/

sk97

MarcinP replied at 2017-6-2 04:33
Basically umi doesn't have servicing centres only seller can provide warranty service.
But as you ...

Post time 2 sec. Before | Show the author posts only

Hi , I've damaged the screen and digitize doesnt work anymore. I've been doing some research and was debating whether i should keep the same metal frame or should i replace it with a new one, the ones that come attached together and if there is any different. Also if i could kindly ask to step by step in bullets and mention the flash update is it required ?

MarcinP

sk97 replied at 2017-6-2 05:25
Post time 2 sec. Before | Show the author posts only

Basically screen with frame is very easy to replace this is only the difference. Glass with screen is easy to replace too but you need know what you doing.
Flashing process is only needed when screen not responding or not working correctly due to incorrect drivers.
Here is SPFT instruction
http://community.umidigi.com/thread-11-1-1.html
Also here you have all available ROMs
http://community.umidigi.com/forum-134-1.html

LeXuZ

@MarcinP do you know where to apply the 2 sided tape? The one that came with my screen isn't doing a proper job.

MarcinP

LeXuZ replied at 2017-6-5 04:20
@MarcinP do you know where to apply the 2 sided tape? The one that came with my screen isn't doing a ...

Double side tape should be only around screen! You can reuse from old screen. Just use hairdryer and raise up temperature of old screen and gently remove from screws and apply to new one.

sk97

MarcinP replied at 2017-6-3 01:50
Basically screen with frame is very easy to replace this is only the difference. Glass with screen ...

i just received my lcd screen with frame however in the back it doesnt have the extended ribbon cable. what should i do ? can i use the one that is currently attached on the broke phone, i dont know whether its removable or not

LeXuZ

You have to re-use  that from the old parts. It comes off easily. In fact you have to re-use the whole inside parts.