Umi Super Volume **FIX**

Jay_Ponce

What fix method actually works?

dodora3d

how can back to default settings ?

MarcinP

dodora3d replied at 2016-12-17 16:16
how can back to default settings ?

If I good remember factory data reset. Settings - backup & reset - factory data reset.

arfan.chatha

Does these changes just louder the sound or enhance ( improve listening experience )  the sound quality like other phones?
the sound of my UMI Plus is awful i had never ever before in any phone.
Please recomend me
(1) Music and video: the graphic equaliser will just work with off line or will also work with Online Sound like youtube, facebook videos if not what to do?
(2) In call voice: I have just change the values in engneering mode but its satisfactory.
(2) Ringing Sound Quality: what to do for best ringing sound ?

Andrew87

\n\nDoes anyone know what to tweak under Speech Enhancement? I believe earpiece volume can be improved there.
EDIT: From my search online, many people seem to reference a 'Normal Mode' in Hardware Testing --> Audio. However, there is no such mode for me. The only options I see when I enter Hardware Testing --> Audio are:

• Volume
• Speech Enhancement
• Debug Session
• Speech Logger
• Audio Logger
• Audio Wake Lock
  

There's also mention of another 'Normal Mode' in Speech Enhancement that I can't seem to find. Both are crucial to improving earpiece sound.

boekhoffm

Yes can somebody please post the exact setting to be changed for earpiece/call volume (not headset or headphones) because none of the settings posted on page one of this post worked for me when I tried them one-by-one.

boekhoffm

OK I have been through every single UL GAIN setting on the Audio/Volume/Voice page and set them all to 252 (the maximum).
Also, all of the WB (wide band) settings I set them to the maximum too (same as the NB, Normal Band) ones.

The result: no change in the call volume, so what is the answer?

FYI here are the defaults for my UMI SUPER, because somebody else asked for them:

NB/WB/Receiver: 164
NB/WB/HAC: 72
NB/WB/Headset: 180
NB/WB/Headphone: 180
NB/WB/Speaker: 180
NB/WB/Headset 5-pole: 168
NB/WB/Headset 5-pole ANC: 168
NB/WB/TTY: 72
NB/WB/Lpbk_Handset: 164
NB/WB/Lpbk_Headset: 180
NB/WB/Lpbk_Handsfree: 180

boekhoffm

dodora3d replied at 2016-12-17 16:16
how can back to default settings ?

FYI here are the defaults for my UMI SUPER, because somebody else asked for them:

NB/WB/Receiver: 164
NB/WB/HAC: 72
NB/WB/Headset: 180
NB/WB/Headphone: 180
NB/WB/Speaker: 180
NB/WB/Headset 5-pole: 168
NB/WB/Headset 5-pole ANC: 168
NB/WB/TTY: 72
NB/WB/Lpbk_Handset: 164
NB/WB/Lpbk_Headset: 180
NB/WB/Lpbk_Handsfree: 180

AZJMS

I hame a UMI plus and fter update from Android 6 to 7 have a bad microphone .

The people I talk to on the mobile phone complain that they listen to me very low.
Any idea how to turn up the microphone volume?

Is possible change volume setting using MTK Engineer Mode ? Where?
thanks

anubis

Hi there,
at first, I wanna thank you for this settings and volume fix. Music from the speaker is louder and good. But, can you please write me, which of these settings are focused on volume from speaker (for calls). An example. When somebody calls me, I can hear him good only when there is quiet around me. When there is some noise it is unanble to hear him properly. So I need to rise the volume of speaker for incomming calls. Thank you.