Z Pro - Android 6

MarcinP

speedycvc replied at 2017-4-17 05:24
Edited by speedycvc at 2017-4-17 05:27 \n\nHi all
After OTA update with wifi:

So if previous firmware was better for you you can comeback to previous version.
Here you have SPFT updating procedure but please uncheck user data to be not losing pictures etc.
http://community.umidigi.com/thread-11-1-1.html
And here all available ROMs
http://community.umidigi.com/forum-150-1.html

bencebacsi

Hi,
I'm referring to the last paragraph of the first post of this thread:
''Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.''

prakasam

\n\n
- The phone was getting heat while charging.
any solution ....

speedycvc

bencebacsi replied at 2017-4-17 06:40
Hi,
I'm referring to the last paragraph of the first post of this thread:
''Kind request from users: ...

Sorry but I did post and forgot to say that I did by flashtool after seeing that I had issue with OTA.

I think to do a rollback to old firmware

banumbirr

speedycvc replied at 2017-4-17 05:24
Edited by speedycvc at 2017-4-17 05:27 \n\nHi all
After OTA update with wifi:

Hi,

I have the same issues !!

For the rotation problem, do following solution, it works fine for me:
1) open call dialer and type in *#*#3646633#*#*
2) You will be transferred to engineering mode - hardware testing - sensors - sensors calibration
3) clear calibration


I don't noticed problem with the Wfi.

But I have the same problem with the 3G/4G communication: for this all helps are welcome

I will try an complete flash from latest SPFT ROM

banumbirr

banumbirr replied at 2017-4-17 15:41
Hi,

I have the same issues !!

Hi,

some news: I flashed, with SPFT, the latest ROM (Upgrade Flash): will give you feedbqck in few hours  

speedycvc

\n\n

javierpc

bencebacsi replied at 2017-4-16 04:43
I can't confirm your issue neither with the current, nor with any earlier versions, although there ...

Installed the last update with SP Flash Tool and now no issues.
Thanks.

javierpc

Clean installation of last update with SP Flash Tool. Solved my rotation issues going to Settings -> Screen -> Sensor-G calibration. Now screen rotates between landscape and portrait mode as expected.

ginozzo

Hi all,

I live in Italy and my operator is H3G Italy.
I have found that the phone with latest fw installed locks to 4G signal only if it is very strong (3-4 bars), otherwise goes to 3G.
Even chosing "4G preferred" seems to give same problem.
I have tried to use mtk engineering to lock the signal to 4G but after that it locks just to 3G.
I am sure the 4G signal is present because if i put my SIM to another phone i get 4G.

Do anyone have similar problem and maybe is there any fix for this?