Usb mtp transfer file not working

natzen · Post time 2017-1-31 14:09:32

hi all , i found one issue ,usb mtp not working on last rom it's possible to fix ?
Thanks

tesco · Post time 2017-2-11 01:42:20

Edited by tesco at 2017-2-11 18:54 \n\n

Thordelan replied at 2017-1-31 17:53
I don't know if it's the proper/simplest solution but I had to do 2 things to make it work.

1) Inst ...

Found a fix for the MTP Device problem.
Make sure the usb cable is connected to phone and computer and the phone is unlocked.
Go to the C:\Windows\INF folder
In the search box (top right hand side) type wpdmtp and right click on the wpdmtp.inf file and click install
This should fix the problem. It will not work unless you have the phone connected to the USB port and the phone switched on and unlocked.

Thordelan · Post time 2017-1-31 17:53:22

I don't know if it's the proper/simplest solution but I had to do 2 things to make it work.

1) Install VCOM driver MTK drivers for windows :
- http://community.umidigi.com/thread-4916-1-1.html
- http://community.umidigi.com/thread-6193-1-1.html

2) Enable developer options, then USB debugging mode in those options

natzen · Post time 2017-2-1 14:41:59

Thordelan replied at 2017-1-31 17:53
I don't know if it's the proper/simplest solution but I had to do 2 things to make it work.

1) Inst ...

Very good thanks ,it's work !

Medard22 · Post time 2017-2-7 14:45:48

I use AirDroid from Google Play store most of the time.

Abou-ryad · Post time 2017-2-12 03:30:52

Hi
thanks for the tip