UMIDIGI Power 5 4GB_N_V1.0_20210716 - SPFT release

bencebacsi Post time 2021-7-23 05:11:32 | Show all posts |Read mode [Copy link]
0 920
View: 920|Reply: 0

UMIDIGI Power 5 4GB_N_V1.0_20210716 - SPFT release

[Copy link]
Post time 2021-7-23 05:11:32 | Show all posts |Read mode
This is the SP Flash Tool release of the
N_V1.0_20210716 system software
for UMIDIGI Power 5 4GB+128GB

Only for models with version 6 modem. Please flash this ROM only if you have currently the same version (UMIDIGI_Power 5_N) installed on your phone

Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI Power 5 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.

First release for manufacturing

FOTA version: UMIDIGI_Power 5_N_V1.0_20210623_20210716-1739

SP Flash Tool

Flashtool tutorial:

Extract the .rar file before use. The scatter file (MT6765_Android_scatter.txt) is inside the extracted folder, together with the other components

VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.

Here's an optional solution to start the flashing process on your UMIDIGI Power 5 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your phone to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and hold the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list