UMIDIGI Power V1.4_20190611 ROM - SPFT release

bencebacsi

This is the SP Flash Tool of the

V1.4_20190611 system software

for UMIDIGI Power

Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,

never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI Power receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.

Changelog:

First release for manufacturing

FOTA version: UMIDIGI_Power_V1.4_20190611_20190611-1539

--------------------------------------------------------------------------------

SP Flash Tool

Resources:

Flashtool tutorial: http://bit.ly/SPFTguide

ROM: >>> UMIDIGI_Power_V1.4_20190611.rar <<<

Extract the .rar file before use. The scatter file (MT6765_Android_scatter.txt) is inside the extracted folder, together with the other components

SPFT: SP_Flash_Tool_v5.1916.rar

VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI Power if the standard method doesn't work.

It's especially useful if your phone is bricked or is stuck in bootloop

1. Connect your UMIDIGI Power to USB.

2. Start the flashing process with the Download button in the flasher app.

3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.

4. Wait until the flashing process finishes.

Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

Hikaru

Does UMIDIGI power support "fastboot oem off-mode-charge 0" command?
When I tried with my Power, it returns like this:

$ fastboot oem off-mode-charge 0
...
FAILED (remote: not support on security)
finished. total time: 0.011s

Any suggestions?

sanwris

I have problem wireless update
After restart phone I am getting error after that phone turn on   no  update install . Any solution


Like this
https://youtu.be/GlicWC_5iB4

sanwris

sanwris replied at 2019-6-28 01:49
I have problem wireless update
After restart phone I am getting error after that phone turn on   no  ...

2,3hr  later I decide to remove the SD card and sim and  try it again it work successful installed update

bencebacsi

sanwris replied at 2019-6-28 04:23
Edited by sanwris at 2019-6-28 04:25  

Common issue if a questionable quality SD card is used.

laprinterrah

For the gaming ones, at least an Intel core i5 model is required so that you can run new games without having much afterthought. At least 4GB of DDR3 RAM is needed if you don’t want your high-definition games to hang midway.https://rahatcomputer.com/laptop ... p Laptops In Muscat