UMIDIGI F1 V1.0_20190129 ROM - SPFT release

bencebacsi Post time 2019-3-2 04:20:32 | Show all posts   [Copy link]
15 4311
View: 4311|Reply: 15

UMIDIGI F1 V1.0_20190129 ROM - SPFT release

  [Copy link]
Post time 2019-2-12 13:49:56 | Show all posts |Read mode
This is the SP Flash Tool release of the
V1.0_20190129 system software
for UMIDIGI F1


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI F1 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • Audio settings adjusted
  • Certificates added

The system will show UMIDIGI_F1_V1.0_20190124 as Build number after this update but the real version is V1.0_20190129
FOTA version: UMIDIGI_F1_V1.0_20190124_20190129-1539


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6771_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI F1 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI F1 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

7

posts

40

credits

New Member

Rank: 1

credits
40
Post time 2019-2-14 23:38:48 | Show all posts
hello, I need your help, how to remove words from the screen, on the upper right in red text, after the update appeared
Снимок.PNG

Comments

Please ask the same question only in one thread.  Post time 2019-2-16 12:31

0

threads

57

posts

318

credits

Platinum Member

Rank: 3Rank: 3

credits
318
Post time 2019-2-12 18:53:55 | Show all posts
Please add MTK engineering menu to the firmware or upload EngineerMode.apk for F1.

Comments

Please ask the same question only in one thread.  Post time 2019-2-16 12:28

0

threads

3

posts

12

credits

New Member

Rank: 1

credits
12
Post time 2019-2-14 10:31:20 | Show all posts
Can you fix it so as not to select 14 ch by tethering?
Or will you be able to select channels rather than automatic?
On Japanese wi-fi handset, most terminals can not connect to 14 channels. However, tethering frequently selects 14 ch and will not connect.

0

threads

13

posts

58

credits

Senior Member

Rank: 2

credits
58
Post time 2019-2-15 18:56:17 | Show all posts
Edited by negan16 at 2019-2-20 05:24  

Hello, did you try to reset the phone?
________________________________________________________________________________
Mini Militia App Lock 7Zip

0

threads

7

posts

40

credits

New Member

Rank: 1

credits
40
Post time 2019-2-16 00:19:02 From the mobile phone | Show all posts
negan16 replied at 2019-2-15 18:56
Hello, did you try to reset the phone?

Yes, не помогло
 Author| Post time 2019-2-16 12:30:54 | Show all posts
kvzy replied at 2019-2-14 10:31
Can you fix it so as not to select 14 ch by tethering?
Or will you be able to select channels rather ...

You can't manually set the channels but you can select either 2,4G or 5G, so if you have issues on 2.4GHz, try to use 5GHz.

0

threads

3

posts

12

credits

New Member

Rank: 1

credits
12
Post time 2019-2-16 13:35:42 | Show all posts
bencebacsi replied at 2019-2-16 12:30
You can't manually set the channels but you can select either 2,4G or 5G, so if you have issues on ...


I am troubled because I have a Wi-Fi terminal that can connect only at 2.4GHz.
Also, in Japan's law when using 5GHz, outdoor use other than W56 violates the law.
Is there a solution?
I hope it will not be connected to 14ch.

0

threads

57

posts

318

credits

Platinum Member

Rank: 3Rank: 3

credits
318
Post time 2019-2-16 15:43:57 | Show all posts
Edited by lobyte at 2019-2-17 02:33  

In the firmware there are problems with editing partition "vendor", TWP and the root are installed, but only "system" partition is edited. When editing the "vendor" partition, either an error occurs or it is edited, but there are no changes in fact. Without editing the file vendor/ets/fstab.mt6771 impossible to disable encryption partition "data".
How can I disable the encryption of "data" partition?
I tried to edit firmware with hex editor (without breaking file structure, so that it could be updated via OTA) and flash in the full firmware update mode - there are changes in the "system" partition, but vendor partition lives its own life without changes, as if there is a separate hidden "vendor" partition for the system, or it does not reflash if the checksum does not match.

0

threads

57

posts

318

credits

Platinum Member

Rank: 3Rank: 3

credits
318
Post time 2019-3-2 04:20:32 | Show all posts
Why do other sites post official firmware earlier than here?
12Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list