UMIDIGI G V1.8_20170727 ROM - SPFT release

bencebacsi Post time 2017-8-29 19:43:32 | Show all posts [Copy link]
39 5409
View: 5409|Reply: 39

UMIDIGI G V1.8_20170727 ROM - SPFT release

[Copy link]
Post time 2017-7-29 02:25:07 | Show all posts |Read mode
This is the SP Flash Tool release of the
V1.8_20170727 firmware
for UMIDIGI G

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI G receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.





Changelog:
  • Available video record quality settings change to "high", "medium", "low", etc.
  • Settings - "projection" in the voice menu removed


--------------------------------------------------------------------------------
SP Flash Tool
Resources:
.

ROM: >>>>> UMIDIGI_G.V1.8_20170727.rar <<<<<
Extract the .rar file before use. The scatter file (MT6737M_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI G if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI G to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

0

threads

3

posts

44

credits

New Member

Rank: 1

credits
44
Post time 2018-1-16 02:28:52 | Show all posts
bencebacsi replied at 2018-1-11 03:19
If you haven't done it yet, please flash the latest ROM with SP Flash tool in firmware upgrade mod ...

Unfortulately this isn't the solution for the Wifi problem
Did the firmware upgrade with the SP Flash tool to Rom V1.8;   this version was already active.
Within 2 hours the Wifi internet connection is lost again and can only be activated by rebooting the phone.....
Any other ideas ?   Is it possible to try flashing to Rom V1.6 ??

Comments

And I'm interested in it. (Google Translate)  Post time 2018-1-27 02:00
 Author| Post time 2018-2-13 09:34:54 | Show all posts
andrew89 replied at 2018-2-13 06:23
hi guys... how we can root umidigi g? i try kingoroot, kingroot, iroot, rootgenius .... but nothing. ...

Hi,
Magisk Manager with the stock boot.img (same version you have installed on your phone) and SP Flash Tool should work. Read the installation instructions (''Via Magisk Manager'') on the page.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2018-1-15 18:46:43 | Show all posts
Will Umidigi release new firmware updates for Umidigi G?
The last one was released six months ago...

0

threads

2

posts

8

credits

New Member

Rank: 1

credits
8
Post time 2017-8-1 03:17:05 | Show all posts
Hi, when uploading software, wedge remove everything. I lost the numer IMEI. Please Help Me.
Witam, podczas wgrywania oprogramowania, kliknąłem usuń wszystko. Straciłem numer IMEI. Proszę o pomoc. Może MarcinP pomoże?
Post time 2017-8-1 07:44:39 | Show all posts
pl_macko replied at 2017-8-1 03:17
Hi, when uploading software, wedge remove everything. I lost the numer IMEI. Please Help Me.
Witam,  ...

Pomoże.
Niestety ale wszystko z formatowales.
Teraz musisz użyć SPFT i najlepiej użyć firmware upgrade.
Tutaj masz instrukcje do SPFT
http://community.umidigi.com/thread-11-1-1.html
a tutaj system
http://community.umidigi.com/forum-154-1.html
Po wszystkim musisz użyć SN writer
http://community.umidigi.com/thread-1375-1-1.html
Możesz spisać IMEI z pudełka lub nalepek które były na telefonie.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2017-8-3 02:51:25 | Show all posts
Hi,

will you release UMI OS also for this model?
 Author| Post time 2017-8-3 09:06:42 | Show all posts
palec replied at 2017-8-3 02:51
Hi,

will you release UMI OS also for this model?

Hi,
I'm sorry but no, UMI OS won't be released for this model.

0

threads

2

posts

8

credits

New Member

Rank: 1

credits
8
Post time 2017-8-3 20:48:07 | Show all posts
Thank You :-)
Dzięki Marcin, pomogło :-)

0

threads

2

posts

24

credits

New Member

Rank: 1

credits
24
Post time 2017-8-25 17:27:05 | Show all posts
Hi,
I can do screencast to a TV with umidigi g?
 Author| Post time 2017-8-26 07:27:06 | Show all posts
Nek87 replied at 2017-8-25 17:27
Hi,
I can do screencast to a TV with umidigi g?

Hi,
Check it in Settings --> Display --> Cast.

0

threads

2

posts

24

credits

New Member

Rank: 1

credits
24
Post time 2017-8-27 03:17:16 | Show all posts
Edited by Nek87 at 2017-8-28 13:37 \n\n
bencebacsi replied at 2017-8-26 07:27
Hi,
Check it in Settings --> Display --> Cast.

In version 1.8, I see that the cast option disappeared from the settings. In 1.6 appeared.



0

threads

3

posts

14

credits

New Member

Rank: 1

credits
14
Post time 2017-8-29 19:43:32 | Show all posts
Hi! Front camera don't working after update. How to solve this problem? (sorry, my English bad)
1234Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list