UMIDIGI Z2 V1.0_20181016 ROM - SPFT + OTA release

DuckyTheDuck

Elrent 发表于 2018-10-25 16:41
Edited by Elrent at 2018-10-25 19:17 \n\n@bencebacsi
Well finally i get full up of the umidigi phon ...

Idk how to tell you but at least the secondary rear camera is real, you can test it in the factory test mode, the second front one on the other hand it is possibly fake since there is no test for it. It's just that the software is not there, they don't have a proper api to interact with the second camera.
Just as a heads up, next time don't try to seem "smart" without knowing the full story.

gidynwa

DuckyTheDuck 发表于 2018-11-4 04:10
Idk how to tell you but at least the secondary rear camera is real, you can test it in the factory  ...

You are totally correct. You can completely cover up the main camera and still see that the secondary back camera works in testing mode. Literally, all you have to do is dial *#*#33#*#* , it isn't complicated. The same cameras on the Z2 Pro have been upgraded so that the bokeh mode works

gidynwa

Elrent 发表于 2018-10-25 16:41
Edited by Elrent at 2018-10-25 19:17 \n\n@bencebacsi
Well finally i get full up of the umidigi phon ...

Dial *#*#33#*#* and you can test both cameras individually by covering them up. There's no need to take the phone apart. Unfortunately, the second front camera is fake, but there are two working cameras on the back. The Z2 pro has the same cameras and the bokeh mode is fixed. However, it is a shame that they have the "can't connect to camera" error. It is either faulty parts or a bad update.

tysontaps

Update 2018-11.12-1504

Elrent

DuckyTheDuck replied at 2018-11-4 04:10
Idk how to tell you but at least the secondary rear camera is real, you can test it in the factory  ...

Ducky, sorry but  using the factory test mode, is very easy to run the secondary camera or whatever you want to test, is just a test for hardware "alive"parts  .The most important issue is about if this secondary camera is been used when you do your photos. C'mon see the video!!!

kei6o6

When Z2 returns from sleep, the overlay application and SIP application are stopped.
please fix this.

Eilean

Hi!
Bought Umidigi Z2 Special Edition, now facing the problem that overwrites all the positives - there are no notifications coming up if the app is not opened (for apps like WhatsApp, Viber, Facebook etc. it is very important). So if someone is calling me through WhatsApp or send me a message - I will see it only when I open the app, no notification is shown.
It is not acceptable, because I run a business and have to answer calls and messeges immediately.
Does anyone know how can I fix it?

DuckyTheDuck

Eilean replied at 2018-12-10 22:19
Hi!
Bought Umidigi Z2 Special Edition, now facing the problem that overwrites all the positives - th ...

go to settings>smart assistant>power save manager and turn it off, it's umidigi's custom battery saver that kills all apps , not only suspends them, outright kills the process wich sure saves the battery really well but also kills the functionality, if this is already disabled then go to settings>battery>3dots in the upper corner and battery optimization, see if whatsapp and facebook is in the not optimized category, if it isn't there go to all apps category, look for whatsapp and facebook, tap on them and select don't optimize

it's not an issue, more like an oversight on the battery optimizer

QMaxy

No more system/security/Pie update for Original Z2?

migggasbr

QMaxy replied at 2018-12-23 18:28
No more system/security/Pie update for Original Z2?

I'm wondering the same thing...  I think we deserve Pie Update....