Super V3.02_20161017 ROM - SPFT + OTA release

bencebacsi

ouhab25 replied at 2016-10-30 20:43
i think it is a good update but we still have i think a lot of umi super user GPS trouble from the b ...

Hi,

I already navigated for thousands of kilometers with a UMi Super (Waze and iGO) but I have never experienced any issue, regardless of the environment (narrow streets among tall buildings or a high speed motorway) and the version of the installed ROM. If your phone is defective, we are very sorry for it but you should contact your reseller to make your phone repaired or replaced, since your issue will not be resolved by a software update.

asselsm

bencebacsi replied at 2016-11-1 06:31
Hi,

After processing an update, that is sometimes needed to recalibrate the fingerprint sensor. T ...

I performed the 'calibration' and the issue seems to have been addressed. Was this solution included in the release notes? There really should be a way for this important information to be passed along with the update. Regardless, thanks for the tip.

sawo

Any reason why the battery drains so quickly after this update? Nothing is installed besides the software update, the battery window shows only WiFi and screen as the main battery users, but still the phone barely holds 24 hours where before i was able to get 48+. Looks like there are other people with this problem in the comments above.

MarcinP

bencebacsi replied at 2016-11-1 06:37
Hi,

I already navigated for thousands of kilometers with a UMi Super (Waze and iGO) but I have ne ...

I can confirm that GPS in my device is working 100% fine (I  have done around 1200 km with umi super GPS on motorway, narrow roads, city roads).  There is around 6 m accuracy but is not jumping in my device.
Conclusion is that THIS IS NOT SOFTWARE ISSUE cause GPS signal jumping.

sawo

I managed to fix the GPS jumping around issue by selecting the Location service to use Device only and exclude other sensors (WiFi, BT, etc.) - not sure what the real issue is, but at least for me that fixed it.

nik313

It is possible to make a update only the aplication for camera?
I have v3.02_20160708 ROM.

nik313

I do not want to change anything else.

Karll7

So we can do the new update by only do a new fingerprint and calibration solves the problem..and what about battery it really drains faster?!
And why no update to fix the focus on camera specifically in low light or night??

nik313

MarcinP replied at 2016-10-31 23:46
Hi khmtambi
I have some solutions for you.
As we complained about same issues ( screen sensitivit ...

can you explain more?
I want only the camera apk from Super V3.02_20160923 rom.

MarcinP

\n\n

nik313 replied at 2016-11-6 02:27
can you explain more?
I want only the camera apk from Super V3.02_20160923 rom.

Download firstly 2 Full ROMs.
Unpacked/unzip to two separate folders.
Cut and Swop just android, software (ROM)  file from latest to oldest.
Use older ROM.
Your full rom is ready to upload in to your device.
I used latest software 20161017 and 20160708. In settings of your phone you will get latest software number but touch and finger print will work correctly as was working in 20160708 but you will get latest camera app.