BRICK

cranties

I be done to flash with sptools... i open phone, change the battery with one of my friend that have iron too and flash...
the problem is that screen is always off.. when flash is off, after flash is off, before flash is off...

KKBL

Thank you, hbbayrak, hopefully it will work for me... :-)

KKBL

Hmm, so mt65x3 VCOM USB driver does not work in W10

hbbayrak

mt65x3 me in this system VCOM enterprise system Windows 10 USB driver is running.
consecutive attempts to install several times. If you remove the nuisance still try Windows 8

hbbayrak

cranties replied at 2015-9-15 15:15
I be done to flash with sptools... i open phone, change the battery with one of my friend that have  ...

my brother on the phone screen remained black as yours did not feel like a logo or something. as a solution to remove the back cover and the battery plug konnetör hungry so ate connect PCs. I took care of it but I tried 4 or 5 hours.

hbbayrak

from there you can check if you want the installation files if you install mega.co.nz. just install the driver as the driver who had problems a few different results if the FTC also know 65xx phones PC.

muppetz

I ' ve bricked my UMI Iron by mistake , same problem related here ...
Solved :
- make sure battery  is fully charged
- remove the metal back cover
- install SP Flash Tools (last version)
- install "MTK_USB_ADB_Ultimate"
- run as admin SP Flash Tools
- place the phone display down and connect usb to PC
- nothing happend .... so carefully disconnect and reconnect the battery
- wait a few seconds and "voila" UMI is recognized , SP Flash starts and the phone is back in use

muppetz

\n\nI ' ve bricked my UMI Iron by mistake , same problem related here ...
Solved :
- make sure battery  is fully charged
- remove the metal back cover
- install SP Flash Tools (last version)
- install "MTK_USB_ADB_Ultimate"
- run as admin SP Flash Tools
- place the phone display down and connect usb to PC
- nothing happend .... so carefully disconnect and reconnect the battery
- wait a few seconds and "voila" UMI is recognized , SP Flash starts and the phone is back in use ,
or for making most sure :
- don't make it on Windows 10 it won't work
- disable any protection software (firewall , antivirus &antispyware )
- install USBDEVIEW and uninstall any drivers refering to UMI Iron ,
- download "Y900_UMI_V1.4_20150731_1245(zip format)" from "http://www.needrom.com/download/umi-iron/"  , thanks to s7yler
- unzip "Y900_UMI_V1.4_20150731_1245"
- install Umi drivers from "All Ultimate MTK USB Driver/ All MTK Drivers /New inst. win 7&8x64 "
- install SP Flash Tools (latest version) and run as admin
- in SP Flash Tools select "MTK_AllInOne_DA.bin" from SPFTools folder and "MT6753_Android_scatter" from "Y900_UMI_V1.4_20150731_1245" folder
- power off the phone
- click on "Download"
- press on "volume down " and keep it pressed in the mean time connect phone usb to PC
- wait for installation of "DA USB VCOM PORT"
- in short time installation will begin , you will see all progress of software installation
- restart the phone and install stock vs 1.5 via OTA or download it from  "http://www.needrom.com/download/umi-iron/"  and recover it as update.zip
- upgrade to vs.1.6 via ROOTJOY
-
-
- succes