Gyroscope sensor issue

Gerald

hi all
hi moderator
I've already done the last firmware and the reset factory as you mentioned. the issue is still there.
Do you  have a alternative solution in waiting the bew firmware ?
many thanks

nullinger

\n\n

Hi, i received my UMI Z pro today and had also issues with the gyroscope. Pictures wont rotate in the gallery, youtube did not turn to fullscrenn after rotating the phone. I tested anything i found, even recalibrating in engineering mode. But i found a way to fix the problem and now everything works fine .

This is what i did:

1) open call dialer and type in *#*#3646633#*#*
2) You will be transferred to engineering mode - hardware testing - sensors - sensors calibration
3) clear calibration

4) recalibrate

But this did nothing, same issues as before, so i cleared the calibration again. (no idea if it works only if you clear the calibration or not)

Then I went to the playstore and searched for "sensor calibration" and the first tool i found was "Quick TuneUp-Phone Calibration".
After i read the comments i didnt had much hope it would change anything, but i gave it a try.
After installation i used the sensor calibration feature and rebooted my phone and now my sensors work fine, hope this helps you guys.


You can download it here: https://play.google.com/store/ap ... s.quicktuneup&hl=de

Greetz nullinger

Gerald

hi guy
I gonna try right now
many thanks friend.

Oye

I received my Umidizi Z Pro today(05/04/2017), after setting up my google account, i opened the playstore to download whatsapp, the phone just went dead and has refused to turn on again. Any solutions ?

Gerald

for the moment the solution of nullinger works.
but one day testing.... I'll keep you informed day by day

Oye

Oye replied at 2017-4-5 19:48
I received my Umidizi Z Pro today(05/04/2017), after setting up my google account, i opened the play ...

It was charging, when it went dead. Its been on charge now for over 3 hours, no signs of life.

Oye

chooks06 - It was charging, when it went dead. Its been on charge now for over 3 hours, no signs of life

chooks06

Oye replied at 2017-4-5 22:10
chooks06 - It was charging, when it went dead. Its been on charge now for over 3 hours, no signs of  ...

Geez, if you can't see the charging icon (phone off) then likely it's dead.

Exchange it if possible.

thehog

I received my Z pro 4 days ago and already had the issue twice. For me rebooting also fixed the issue twice. Hopefully this is an issue which can be fixed by a software update.

Oye

thehog replied at 2017-4-6 12:38
I received my Z pro 4 days ago and already had the issue twice. For me rebooting also fixed the issu ...

thehog - My Z pro is completely lifeless..... So no chance of a reboot.