Iron Pro soft brick

swissking

Thank you, i'll try. But if it won't work, what can i do?

bencebacsi

In that case try to use another computer. If nothing changes, then the flash memory of your phone might be defective. However, that's something I can't imagine at a such high quality device.

swissking

Hi guys, i've done the memory test, everything went OK! except NAND FLASH and UFS that weren't detected?
What does it mean?

bencebacsi

Hi,

No, that means nothing since all MT67xx processor based smartphones are built with eMMC memory, not with the obsolete NAND flash.
http://www.datalight.com/solutions/technologies/emmc/what-is-emmc

swissking

And UFS was not detected?

swissking

The memory test said:
EMMC:

         EMMC_PART_BOOT1         Size = 0x0000000000400000(4MB)
         EMMC_PART_BOOT2         Size = 0x0000000000400000(4MB)
         EMMC_PART_RPMB         Size = 0x0000000000400000(4MB)
         EMMC_PART_GP1         Size = 0x0000000000000000(0MB)
         EMMC_PART_GP2         Size = 0x0000000000000000(0MB)
         EMMC_PART_GP3         Size = 0x0000000000000000(0MB)
         EMMC_PART_GP4         Size = 0x0000000000000000(0MB)
         EMMC_PART_USER         Size = 0x00000003a3e00000(14910MB)

UFS:

        ERROR: UFS was not detected!

============         RAM Test         ============

Data Bus Test:

[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!

Address Bus Test:

[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
[A30]
[A31]
OK!!

RAM Pattern Test :
Writing ...
        0x44332211,
        0xA5A5A5A5,
        0xA5A5A500,
        0xA500A500,
        0xA5000000,
        0x00000000,
        0xFFFF0000,
        0xFFFFFFFF,
OK!!

Increment/Decrement Test:
Writing...
OK!!

bencebacsi

UFS (or UBIFS) means UBI File-System. That's used by entry level smart phones (mostly with MT6572 SoC), so you just don't have to miss it. The flash chip of your phone seems to be okay.

swissking

So it seems to be a software error. Am i wrong?

bencebacsi

Yes, it's probably a software error but unfortunately I can't mend phones remotely.

swissking

I've also try to use the 3.01, but nothing happen.
If i want to flash it with a win10 pc, which is the process, to install the driver?