Umidigi S2 won't start

cutaprc

i have the same problem do you resolved him?

balooo

Same issue here. After 3 days of usage...
Let us know if you figure anything out!

shingogogogogo

I have the same situation. Please address this problem as soon as possible.

MarcinP

shingogogogogo replied at 2017-12-2 05:43
I have the same situation. Please address this problem as soon as possible.

Guys, could you please be more specific as every case is a bit different and we need more information to give you support.
We always recommending to charge device until you get green LED. Then press and hold power button until phone restart (this should take around 10 seconds).
If phone still not starting you can contact to seller and ask for solution or use SPFT and try flash full ROM.
Here is SPFT instructionhttp://community.umidigi.com/thread-11-1-1.html
And here you have all available ROMs
http://community.umidigi.com/forum-182-1.html

Nur

Hello guys,
I have a problem with my s2 as well. After the latest update the display is off. I can hear the alarm clock, but the screen does not turn on. Have you found a solution?

umis2

umis2 replied at 2017-11-23 20:00
Edited by umis2 at 2017-11-23 20:06 \n\nValf try to push power a very long time ( 10") or do a fact ...

yes! I asked my money back the phone after 1 week discution with gearbest

MarcinP

Nur replied at 2017-12-3 22:44
Hello guys,
I have a problem with my s2 as well. After the latest update the display is off. I can h ...

Please perform full factory reset after OTA update.

Vlastimil

I have my phone from march this year and 3 days ago i put it on charger. After about 2 hours i took the phone off but it is not responding. It is not charging, i cannot restart it, even the red light is not on. The phone is dead and i do not know what to do now. I contacted the seller, DX but they want me to send video to find out what is wrong with the phone. I do not know what video if the phone is not working. Anybody with similar experiences and solution please?

kenneth.saw

Hi,
I forget my UmiDigi S2 phone password, tried Vol(-) and Power button to boot to Factory mode, select the "Clear eMMC", but no response when i pressed the "Power" button.
Please help. Thanks.

fpappalardo

Hi,
I have the same problem,after one day, my first UMIDIGI S2, won't start.
How to perform fatory reset ?
The list of choise is:

Factory Mode
Auto Test
Manual Test
Item Test
Test Report
Debug Test
Clear eMMC
Version
Reboot

When i select hte choise, i try to press power on/of but not responding.

Thank You