I have a umi rome android 5.1 V3.05 speaker and loudspeaker problem,sound is very weak.
"BestLoudness" is activated but when rings is pretty quietly. When i reply another person i
hear pretty quietly,and when i play music its also pretty quietly. My wife have umi romeX
and its about 30% louder. In engineer mode i checked audio sound normal mode,headset
mode,loudspeaker mode & headset loudspeaker mode and compare the two phones and
all is the same but my is too quiet. Could you help me how to solve this problem?
Please help!
If you already know the engineer mode settings, you can try to increase the values there. It might be not enough but those settings obviously can increase the volume. also turn off BesSurround if that's active and you should try with disabled BesLoudness.
If you already know the engineer mode settings, you can try to increase the values there. It mi ...
I have already tried all on the internet,but apparently nothing helps. Perhaps there is
somewhere something that would better suited for UMI Rome but i could not find nothing.
There's too much to explanation and everyone offers their solution,everyone says that the
best way for me,but obviousli is not. I have never found something that would be just for
UMI Rome. Thank you very much for your reply,but i'm still at the beginning.
You can just set the highest values for the highest level. For example (for ringing) at LoudSpeaker Mode --> Ring: Level 14: Value is 255 and Max Vol is 160. The default values should be much lower.
Default setting is for loud speaker/ring level 0=128, level 1=136, level 2=144, level 3=152, level 4=160,level 5=168, level 6=176, level 7=184, level 8=192, level 9=200, level 10=212, level 11=224, level 12=236,
level 13=248, level 14=255, but max vol=116 . Is not the maximum alowed power 145-150 because of the
possibility of damage to the speaker?
Dudo replied at 2016-7-6 06:17
Default setting is for loud speaker/ring level 0=128, level 1=136, level 2=144, level 3=152, level ...
The Level values are relative values counted from the Max Volume value. So the Max Volume can be increased significantly. Don't try the max value at the first time, you'll hear if your speaker sounds distorted. In that case set a lower value. If the speaker sounds destorted but still quiet, then your hardware needs to be repaired.
I tried already to boost maximum sound at 145, 150 and now at 160 and still no change.
I still do not know what else to try , because nothing seems to be helping.
All I almost tried or changes in the sound does not help noticing how even a little bit so that the sound does not have any disorder . All sound settings that I changed were not changed . Maybe somewhere I'm wrong , but I do not know what more to try .
[Copy link]
Peep Card
Radar card
Post time 2016-7-6 02:56:52
Riser card
Top Cards
Silent card
Noise card
Highlight card
Jack
Magic mirror
Post time 2016-7-6 05:13:11
Author