BRICK

UMIstake

Seppe replied at 2015-9-14 23:50
yes, I lost IMEI then. But my first priority was to unbrick my device, it was useless for more the ...

The problem is that, you can't permanently restore the IMEI numbers without restoring the NVRAM partition. Those IMEI repair tools write the IMEI into the DATA partition only but that's being erased every time you make a factory data reset.

KKBL

Hi, guys

I am having trouble in Recovery mode Rootjoy, my phone can not connect and can not do a backup ... any of you know the solution? Thank you

hbbayrak

arkadaşım benim umi iron da aynen brick olmuştu. bayağı bir müddet uğraştım ama sonuçda çözdüm. sp flash tool  yükle ( SP-Flash-Tool-v5.1528.00 ) usb driveri yükle ( MT65x3 USB VCOM drivers ) daha sonrada Y900_UMI_V1.4_20150731_1245  umidigi sitesinden bu rom u indir ve zip den çıkart. Telefonu pc ye bağla
sp flash tool aç MT6753_Android_scatter.txt dosyasını göster arkasından "preloader usb vcom port" burayı işaretleme !!! start butonuna bas arkana yaslan yaklaşık 10 dk içinde tertemiz bir umi iron v1.4 ( 5.1.1 ) yüklenmiş olur. keyfine bak.


Please turn on google translate what this summer

cranties

I be done to flash with sptools... i open phone, change the battery with one of my friend that have iron too and flash...
the problem is that screen is always off.. when flash is off, after flash is off, before flash is off...

KKBL

Thank you, hbbayrak, hopefully it will work for me... :-)

KKBL

Hmm, so mt65x3 VCOM USB driver does not work in W10

hbbayrak

mt65x3 me in this system VCOM enterprise system Windows 10 USB driver is running.
consecutive attempts to install several times. If you remove the nuisance still try Windows 8

hbbayrak

cranties replied at 2015-9-15 15:15
I be done to flash with sptools... i open phone, change the battery with one of my friend that have  ...

my brother on the phone screen remained black as yours did not feel like a logo or something. as a solution to remove the back cover and the battery plug konnetör hungry so ate connect PCs. I took care of it but I tried 4 or 5 hours.

hbbayrak

from there you can check if you want the installation files if you install mega.co.nz. just install the driver as the driver who had problems a few different results if the FTC also know 65xx phones PC.

muppetz

I ' ve bricked my UMI Iron by mistake , same problem related here ...
Solved :
- make sure battery  is fully charged
- remove the metal back cover
- install SP Flash Tools (last version)
- install "MTK_USB_ADB_Ultimate"
- run as admin SP Flash Tools
- place the phone display down and connect usb to PC
- nothing happend .... so carefully disconnect and reconnect the battery
- wait a few seconds and "voila" UMI is recognized , SP Flash starts and the phone is back in use