|
|
My suggestion is to use a hairdryer to soften up the loca under the glass, see if press on the screen and then put it under a uv light nail dryer.
Keep in mind that heating can be dangerous (special being metal) and thus make sure the phone is off and completely cooled down internally. Off for 20mins
Don't press too hard and be very careful. This screen (digitizer and glass) is cheap and weak. U may be able to see the improvement happening but don't get your hopes up.
The UV Nail light is to harden the glue. Not needed but may help. Also direct sunlight for like 5 mins will do the same.
This may not yield huge results. It makes sense why a little screen crack ruins touch on these phones. Umi placed way to thin a layer of loca glue between the glass and digitizer. |
|