UMIDIGI S2 V1.0_20170922 ROM - SPFT release

tysontaps

Hey
After yesterday I got my umi-s2 and it has already set up, I can say what.
1.processing perfectly
2.super fast
3.frimware catastrophe android 6 for a new mobile phone first developed and fresh from the factory.
4..bluetooth goes back after every restart even though before
5.notifications led a bad joke, so small and almost not watch next to the earphone, looks like with my s3 if no original firmware on it is a small point in the mü area.
6.Not any app running on it eg KBELL door cam
7.wlan goes only 5 gigaherz at 2.4 only theater
8. roming should also not run abroad <read only
and that with a new and with old softly equipped cell phone, I would have known before what I would have expected I had never bought the phone at the price, I find umi goes 4 steps back instead of 2 before. bin arg disappointed of the phone especially 2 umi super here and everything goes perfectly.
I expect the android 7 to follow and that also this year and then the diewersen errors are corrected or will be. We are customers who participate a lot but it should already be in the frame and not that we are so ausgethlicht pulled. I always thought umi can rely on you it is a top handy but man never learns from .umi should prefer to build a little less new cell phone and for the firmware what do what uses the most beautiful handy if the software is shitty.

in this sense <is my opinion and many more also an offense to the company


mfg

tysontaps

\n\nschon komisch ,sagt mann was kommt nichts mehr ,was soll das hier als offizelle UMI support seite lesen und dann abhacken und kommt da noch was <bin jetzt nach dem kauf schon etwas enttäucht das sich hier dann auch keiner zuckt ,aber wie heisst es so schön mann lernt nie aus .Kommt für das umi s2 kein nogat war das sicher mein letztes umi was gekauft worden ist .

eben gefunden hier gibt es futter https://www.needrom.com/download/umidigi-s2-2/

mfg tyson

Mschubert

Hello and good day, I have recently the UMIDIGI S2 and have also installed the latest update. I have now found the fast load does not work. I needed 60 minutes for 10% battery. I had previously a UMI Super and there was 100% in about 100 minutes reached.
This problem is known and will be fixed

bencebacsi

tysontaps replied at 2017-10-28 19:44
Edited by tysontaps at 2017-10-28 19:52 \n\nschon komisch ,sagt mann was kommt nichts mehr ,was sol ...

Hi,
That ROM is for the second generation of UMIDIGI S2, that's built with the MT6757D processor (the same one used in UMIDIGI S, Z1 and Z1 Pro) with android 7.0 support. The first generation of the S2 (with MT6757) is released with Andorid 6.01 and is not upgradeable. These are not compatible platforms since they are different processors.

bencebacsi

Mschubert replied at 2017-10-29 17:20
Hello and good day, I have recently the UMIDIGI S2 and have also installed the latest update. I have ...

Hi,

Normally there are no such issues with the fast charging. First please try to charge your phone while it's turned off. If the charging is still that slow, try to use another charger and USB cable (maaybe the one supplied with your Super) to compare.

KillerGamingBro

bencebacsi replied at 2017-10-20 06:34
Hi,
I'm sorry but replacement (OLED) screen for the Z1 Pro is not available on the market, since i ...

Is there anyway I can fix my phone?Or do I have to spend another $400 on a new phone?

bencebacsi

KillerGamingBro replied at 2017-11-2 04:29
Is there anyway I can fix my phone?Or do I have to spend another $400 on a new phone?

Currently you can buy a Z1 Pro for $250 while a new OLED screen would cost $100-150 + repair cost and your phone wouldn't be in the same intact condition as it came out from the fatory. So I'm afraid, if the screen of your Z1 Pro is broken, it's better to handle it as a totaled device since the value of your loss is more than 50% percent of the price of a brand new device. You cannot fix a broken screen, of course, it can be replaced only but in this case it's not worth the price.