UMI ROME Flyme

miskin121 · Post time 2016-1-22 05:26:54

Edited by miskin121 at 2016-1-22 05:29 \n\nIn rootjoy 1.0.4 is aviable to download new ROM Umi Rome Flyme 4.5.3A. Did you tray it somebody?

Argail · Post time 2016-1-28 18:30:44

Yes, i confirm that the configuration via MTK engeneering mod will reset after a simple reboot.
Moreover the touch problems will not solve so good in this way.... we need a new firmware.... UMI u understand this ?

msyldz · Post time 2016-1-22 18:24:57

touch is same with 3.03. also flyme is very buggy. i mean it is useless.

iksmen · Post time 2016-1-22 06:11:41

hello. i download flyme 4.5.3A via TWRP.. bluetooth not working.same battery performance.

iksmen · Post time 2016-1-22 21:04:16

Zoka replied at 2016-1-22 17:14
How about touch ?

hello.umi rome flyme 4.5.5A touch function is not good.

Acciaio · Post time 2016-1-23 01:46:04

iksmen replied at 2016-1-22 21:04
hello.umi rome flyme 4.5.5A touch function is not good.

Touch is worst than that of V. 3.03 but if you look at the forum there's a brilliant solution going to engineering mode.

AcoRobi · Post time 2016-1-23 04:31:49

This phone absolutly not good, i sand back to seller.

harry051 · Post time 2016-1-23 18:50:30

Zoka replied at 2016-1-22 17:14
How about touch ?

Fo me bluetooth is working. I have conected my smartwatch with the phone.
wakeup gestures are not working.

harry051 · Post time 2016-1-23 18:51:28

touchscreen is wokring normaly for me with this fix:
THIs is solution from other forum for touchscreen.

Get app - MTK engineering mode
Hardware Testing ==> Touchscreen ==> Settings
select and change values

tpd_em_auto_time_interval - 10
tpd_em_pressure_threshold - 25
tpd_em_debounce_time -4
tpd_em_debounce_time0 - 5
tpd_em_debounce_time1 - 9

harry051 · Post time 2016-1-26 18:11:22

CAmera on flyme is freezing occasionally .

Acciaio · Post time 2016-1-27 06:29:00

Edited by Acciaio at 2016-1-27 06:30 \n\nRegarding touch screen parameters in engineering mode :Yes it works fine but....did you check if after rebooting or switched on the parameters remain? All users reported that they disappear and the parameters return to stock values