tempered glass and bubble on screen of the entire length

Polo91

There is a trick that I do not understand is the installation of a tempered glass on the Z PRO.This is already the 3rd I put and I have on each side of the device a strip of 5mm Wide, the entire length of the screen "bubble", I cleaned the screen properly, I wiped it and I used the technique of the wooden toothpick to lay it down properly. I had bought all the pre-tempered glass for the Z Pro at the beginning, but I was unable to stick it and I had to throw it away because it was too small compared to the entire front panel. Any ideas ?

chooks06

It's due to the 2.5D curvature. The screen is not flat all the way.

Haug523

Yeah you will need a curved tempered glass for this to fit or a smaller tempered glass that don't reach out to the curved sides.

Polo91

Haug523 replied at 2017-6-11 16:40
Yeah you will need a curved tempered glass for this to fit or a smaller tempered glass that don't re ...

Ok, and I have to take what as tempered glass, since the ones provided for the Z PRO have this worry. I bought the original glass and it hardly covers the screen. And if I do not, dragontrail layer protects against scratches, not against shocks

Polo91

You are right for the 2.5D screen, I forgot to check that when I ordered the glasses soaked, I will recommend another original, it will never be that the 4th ...