UMIDIGI F2 V1.0_20200306.V3.12 ROM - SPFT + OTA release

bencebacsi Post time 2020-3-11 15:49:41 | Show all posts [Copy link]
34 4907
View: 4907|Reply: 34

UMIDIGI F2 V1.0_20200306.V3.12 ROM - SPFT + OTA release

[Copy link]
Post time 2020-3-9 23:16:01 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.0_20200306.V3.12 system software
for UMIDIGI F2


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI F2 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • Voice echo issue in headset and loud speaker phone calls fixed
  • Media volume level settings optimized
  • Live Wallpaper bug fixed


FOTA version: UMIDIGI_F2_V1.0_20191122_20200306-1905

--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6771_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.


Here's an optional solution to start the flashing process on your UMIDIGI F2 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI F2 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal storage of your phone
  • Go to Settings → System → About phone → Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update:
It can update version 20200116 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy + 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The update process will start and needs a few minutes to be finished.
  • After a succcessful installation, you can read the ''Install from SD card complete.'' message and the recovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'

Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

1

threads

22

posts

231

credits

Platinum Member

Rank: 3Rank: 3

credits
231
Post time 2020-3-10 03:51:21 | Show all posts
As I wrote. Firmware weak level of GSM and Wi-Fi. On On Pro, which is located next to F2, the performance of these levels is much higher and it works better with networks, respectively. In the phone application, the first speed dial is constantly empty and nothing can be added to it. They did not return the function of recording telephone conversations. Please return. A very useful and useful feature.

0

threads

16

posts

132

credits

Senior Member

Rank: 2

credits
132
Post time 2020-3-10 22:36:02 | Show all posts
I update but not see any diference... Sound on headphones is very poor, notifications in setting panel cannot close...

0

threads

8

posts

52

credits

Senior Member

Rank: 2

credits
52
Post time 2020-3-10 14:41:29 | Show all posts
Does the update come with newer security patch?

0

threads

6

posts

226

credits

Platinum Member

Rank: 3Rank: 3

credits
226
Post time 2020-3-10 15:00:20 | Show all posts
charlesscouting replied at 2020-3-10 14:41
Does the update come with newer security patch?

just updated
it's still the same 5oct2019
only the kernel date updated, same build

0

threads

70

posts

360

credits

Platinum Member

Rank: 3Rank: 3

credits
360
Post time 2020-3-11 07:40:29 | Show all posts
zyi replied at 2020-3-10 15:00
just updated
it's still the same 5oct2019
only the kernel date updated, same build

hahaha incredible ...its non sense ... this update is a fake ?

4

threads

19

posts

90

credits

Senior Member

Rank: 2

credits
90
Post time 2020-3-11 08:58:21 | Show all posts
mikele replied at 2020-3-11 07:40
hahaha incredible ...its non sense ... this update is a fake ?

Seems it. No difference whatsoever. Important issues have been ignored:

1) Security Patch Update
2) Microphone Bug
3) Camera Issues
4) Random Restarts
5) Fingerprint sensor inaccurate

0

threads

5

posts

62

credits

Senior Member

Rank: 2

credits
62
Post time 2020-3-11 10:42:45 | Show all posts
Still no Multiple User enabled!!!!

0

threads

8

posts

52

credits

Senior Member

Rank: 2

credits
52
Post time 2020-3-11 11:57:36 | Show all posts
So disappointed, I guess I will warn everyone I know not to buy their ufit watch.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2020-3-11 15:49:41 | Show all posts
Edited by garryo at 2020-3-11 15:51  

Nice to see a new update.  Hope Umidigi keep regular updates coming.

A couple of things I would like to see in future updates;

1)  Android security patch is still at October 2019.  This needs updating please.

2)  What has happened to the phone-call record function?  Please bring this back.  It was very useful.



1234Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list