UMIDIGI A3 Pro N Android 9.0 V1.2_20190904 ROM - SPFT + OTA release

bencebacsi Post time 2019-10-15 06:37:23 | Show all posts [Copy link]
7 2256
View: 2256|Reply: 7

UMIDIGI A3 Pro N Android 9.0 V1.2_20190904 ROM - SPFT + OTA release

[Copy link]
Post time 2019-9-6 23:11:41 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.2_20190904 system software
for UMIDIGI A3 Pro N Android 9.0
Please flash this ROM only if your phone is shipped with Android 9.0 system. This software is NOT compatible with Android 8.1 phones!


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI A3 Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.





Changelog:
  • Minor bug fixes and system improvements

FOTA version: UMIDIGI_A3_Pro_N_V1.2_20190904_20190904_1303


--------------------------------------------------------------------------------
SP Flash Tool
Resources:

Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6739_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI A3 Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI A3 Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------

OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal storage of your phone
  • Go to Settings --> System --> About phone --> Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update:
It can update version 20190716 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zipfile to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the bootselector mode. It needs about 10 seconds or a little bit less if your phone wasalready powered off.
  • Here you can move withthe vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy + 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'.



Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

5

posts

42

credits

New Member

Rank: 1

credits
42
Post time 2019-9-25 17:25:53 | Show all posts

Here is Original Android 9 for Umidigi A3 Pro with shipped 8.1
UMIDIGI_A3_Pro_N_V1.2_20190910 .zip

https://mega.nz/#!Z4dQnayB!R0bWQFULW...g8NwS2SJgp1KPU

Flash it via SPF, magisk and TWRP 3.2.3 installed, the Fingerprint was deleted, everything was fine.Flash it via SPF, magisk and TWRP 3.2.3 installed, the Fingerprint was deleted, everything was fine.
Very Smooth i love it.

Original Post from Russia
http://4pda.ru/forum/index.php?showtopic=946666&st=560

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2019-9-8 16:10:56 | Show all posts
OK, now we have quite a new ROM for
-Umidigi A3-Pro NON-N for Android 8.1-Versions.
-Umidigi A3-Pro N Android 9-Versions.

Unfortunately mine is an A3-Pro N-Android 8.1-Version N_V1.4_20190416
Status of security-updates is October 5, 2018.

Why is there no update for the A3-Pro 8.1N-crowd? is there some technical diffculty?

Best regards,
r-be, Munich, Germany

0

threads

1

posts

16

credits

New Member

Rank: 1

credits
16
Post time 2019-9-12 21:35:37 | Show all posts
I have two new devices, A3 pro and Power running 9 pie. The google phone app on both are stuck at version 19.0 which does not update via google play store. This version lacks the feature Caller ID and Spam which is available in updated versions. To work around this temporarily I've side-loaded Google phone GO app which works other than a popup about not being fully compatible with device. Overall for the money I'm pleased with both phones.

Request:

1. an upgradable via play store version of google phone app
2. monthly google android security patches. A3 pro current patch is May 2019, Power July 2019 and it's September 12 2019 as of this posting.

3. would be nice if someone would manufacture rugged phone cases for these phones. One that came with phone and others I've purchased don't provide enough protection to screen face.

8

threads

36

posts

211

credits

Platinum Member

Rank: 3Rank: 3

credits
211
Post time 2019-9-15 21:18:28 | Show all posts
Edited by lugau45 at 2019-9-16 00:10  

Wann kommt ein Update für das A3 pro mit Android 8.1? Warum geht das Upgrade hier nicht bei dem 8.1?
Ich bekomme bei dem Update ein Fehler Signatur...

0

threads

25

posts

180

credits

Senior Member

Rank: 2

credits
180
Post time 2019-9-25 19:05:13 | Show all posts
jack11 replied at 2019-9-25 17:25
Here is Original Android 9 for Umidigi A3 Pro with shipped 8.1
UMIDIGI_A3_Pro_N_V1.2_20190910 .zip ...

I want original firmware without TWRP and root.

0

threads

6

posts

40

credits

New Member

Rank: 1

credits
40
Post time 2019-10-7 07:48:36 | Show all posts
Someone knows how to fix dm-verity error? mi cellphone restart every time after the update

0

threads

6

posts

40

credits

New Member

Rank: 1

credits
40
Post time 2019-10-15 06:37:23 | Show all posts
release UMIDIGI A3 Pro N Android 9.0 V1.2_20190910 rom pleaseeeeee
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list