UMIDIGI A5 Pro (EU) V1.4_20190807 ROM - SPFT + OTA release

bencebacsi Post time 2019-8-10 22:14:24 From the mobile phone | Show all posts   [Copy link]
94 16002
View: 16002|Reply: 94

UMIDIGI A5 Pro (EU) V1.4_20190807 ROM - SPFT + OTA release

  [Copy link]
Post time 2019-8-9 12:57:12 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.4_20190807 system software
for UMIDIGI A5 Pro
European Version


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI A5 Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • Improved camera performance and bug fixes
  • Proximmity sensor optimized
  • Fingerprint unlock optimized
  • Detailed cell broadcast (Wireless Emergency alerts) settings added as a new app. (Complies with EEWS requirements)
  • Other minor bug fixes and system optimizations

FOTA version: UMIDIGI_A5_Pro.E_V1.4_20190807_20190807-1437


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6765_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI A5 Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI A5 Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal storage of your phone
  • Go to Settings --> System --> --> Advanced --> About phone --> Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update:
It can update version 20190716 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone boots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy + 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with both volume buttons, and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from SD card complete.'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2019-8-13 04:09:01 | Show all posts
I need help. My A5 pro main camera is not working and the front camera in inverted.

*#8264# show main cam not found and shows camera has been disabled because of security policies when wide andle is selected.

0

threads

1

posts

6

credits

New Member

Rank: 1

credits
6
Post time 2019-8-15 19:15:23 | Show all posts
Edited by Denix at 2019-8-15 19:17  

Hello Community,

First :
My issue is when I try to update the phon version : 'UMIDIGI_A5_PRO.E_V1.3_20190716' personalize version alps-mp-p0.mp7-V2.23' with the new version proposal : ''UMIDIGI_A5_PRO.E_V1.4_20190807_20190807-1437'

The Phone restart after Charging and try to update.
But rapidely the display 'Error'

After restart in the old version :
'UMIDIGI_A5_PRO.E_V1.3_20190716' personalize version alps-mp-p0.mp7-V2.23'

If you want, I put screen shoot and video to better understand
Actual version :
http://denis.derrien.free.fr/Den ... 20190815_110651.jpg

Proposal :
http://denis.derrien.free.fr/Den ... 20190810_063712.jpg

Loading new version :
http://denis.derrien.free.fr/Den ... 5_110712_Load70.jpg

Advertize :
http://denis.derrien.free.fr/Den ... 20190810_063805.jpg

The video with this update :
http://denis.derrien.free.fr/Den ... 20190815_110913.mp4

Second :
On the original version :
'UMIDIGI_A5_PRO.E_V1.3_20190716' personalize version alps-mp-p0.mp7-V2.23'

When I use the application 'DUO by Google' I have a flashing green screen on the phone and also 'video transmission'

Best regards
Denis

Comments

I have the Google Duo problem too. When I use my camera app, with the 120º, the camera is pink.  Post time 2019-8-21 19:31

0

threads

3

posts

58

credits

Senior Member

Rank: 2

credits
58
Post time 2019-8-9 13:38:35 | Show all posts
Edited by camper at 2019-8-9 16:09  

After this EU update 0807 still my front camera and 120 camera are not working all the time.
*#8264# sometimes shows sub cam: no find !!! all other camera's present.
It was working with the first version of the software eu 0704 and showed correct sub camera
Sometimes sub camera works for 5 minutes than it gives message: Can't connect to the camera Please make sure to close other apps that may use camera or flashlightI already did resets
Please advice

0

threads

2

posts

32

credits

New Member

Rank: 1

credits
32
Post time 2019-8-11 20:00:57 | Show all posts
Edited by shumigi at 2019-8-21 17:03  


Hello, I have some problems with my phone Umidigi A5 Pro.  I had flashed this firmware.

1. When I click to camera icon it appeared only front camera. When try to push rear camera botton just stop to working. In wide screen mode it wrote me that "camera has been disabled because of security policies".  I tryed some camera programs from google store and rear camera working but only some of triple cameras because don't recognised all triple cameras and the image is with reversed (with legs in the top). Flashlight didn't working.

2. When I try to delete a message that I received from some phone number, it delete all messages from this number, not one by one.

3. When I connect my wifi the icon to the top near the battery icon is just point, not normal icon for wifi. After some click lock / unlock the phone and working with it , the normal wifi icon appeared.

4. Can you add option for choosing a diffent mobile operator internet connection in the top menu. I can choose only on/off now. I changing from settings menu "Network and internet / Mobile network" and then sellect different mobile internet connection. This is not confortable.

5. Can you add option for different melody for second mobile operator?

6. When I watch videos from phone and push the power botton it stopped but when I pushed power botton again it started automaticaly. Can you make video player in pause function when i pushed the power botton again? And to start manualy. (You can look the youtube player how working).

7. There isn't icon at the top when the phone is in silent mode.

8. When I calling with somebody display make different things. Sometimes it stopped lighting when it's near to the ear but sometimes it just stopped lighting and I must to press the power boton to view the display (not every time working power botton when it is in calling mode).

9. Wake Up icon appears twice on the top next to the clock (on the left) and next to the mobile operator icon (on the right).

10. Contacts are read only and can't be deleted.


Thanks,

Comments

I have the same problems with the camera!! Please, report me if you have any news. Thank you!  Post time 2019-8-14 00:40

0

threads

22

posts

86

credits

Senior Member

Rank: 2

credits
86
Post time 2019-8-9 21:14:00 | Show all posts
"Detailed cell broadcast (Wireless emergency alerts) settings added to the Advanced settings of the Messages app. (Complies with EEWS requirements)"

I can't find this... Someone forgot to put it there.

0

threads

4

posts

32

credits

New Member

Rank: 1

credits
32
Post time 2019-8-9 22:10:56 | Show all posts
This last update for me works very well. Before that, with update EU 16-july, *#8264# show information with 3GB RAM. Now show 4G.
With camera software, I see many changes that possibilite adjust lots of parameters.

0

threads

19

posts

110

credits

Senior Member

Rank: 2

credits
110
Post time 2019-8-10 00:48:57 | Show all posts
FR8146 replied at 2019-8-9 21:14
"Detailed cell broadcast (Wireless emergency alerts) settings added to the Advanced settings of the  ...

I have the non-EU 1.4 firmware installed.  It is found, not under "Settings" under either Network or Apps & Notification, either.

Found it, it's an App - wipe up to see all your Apps (depending on your Laucher, I use LawnChair) - scroll down to look for Wireless Emergency alerts, then, click upper right corner udner top status bar to open the Settings.  

Should be there - it doesn't have "all" the sub-settings & options like the Xiaomi or Huawei running stock Pie 9.0 but, better than zone.

0

threads

22

posts

86

credits

Senior Member

Rank: 2

credits
86
Post time 2019-8-10 03:07:55 | Show all posts
delta128m replied at 2019-8-10 00:48
I have the non-EU 1.4 firmware installed.  It is found, not under "Settings" under either Network  ...

I have EU rom and found it on "Apps and notifications" like you said. Thank you. Anyway, wrong info from umidigi, the thing is not under "Messages" settings (and probably it should be, it seems to be the logical place).

0

threads

1

posts

12

credits

New Member

Rank: 1

credits
12
Post time 2019-8-10 03:32:03 | Show all posts
Hello, I have a Umidigi A5 Pro phone after an unsuccessful update via the 5.1728 SP Flashtool, (windows 10/64) went to the bootloop, then a green horizontal bar appeared at the top of the screen, and then the bootloop again, I just didn’t want to flash, I had to flash in "Format all +download" mode through the last SPFT 5.1916, the phone was flashed, but there were many bugs in the interface, the fingerprint scanner stopped working, it doesn’t add a Google account and many other problems, I tried different versions of the firmware, but all the firmware had the same defect, I also asked another user For backup, from backup there are exactly the same defects and problems, I don’t know where and how to dig, how can I restore the body?

0

threads

19

posts

78

credits

Senior Member

Rank: 2

credits
78
Post time 2019-8-10 17:36:56 From the mobile phone | Show all posts
Why take off Camera software anti vibrations?

0

threads

1

posts

10

credits

New Member

Rank: 1

credits
10
Post time 2019-8-10 20:20:37 | Show all posts

UROMGI_A5_Pro.E_V1.4_20190807.rar was installed with direct ROM.
The camera has not improved at all.
In-camera is not good.
The in-camera cannot be used. Instead, the rear camera is shot upside down.
I think "UMIDIGI is not testing."

0

threads

19

posts

78

credits

Senior Member

Rank: 2

credits
78
Post time 2019-8-10 22:14:24 From the mobile phone | Show all posts
Update again andar now câmera is ok,  but if it is a Sony must bem much better. Put Anti vibration next update.
12345678910Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list