UMIDIGI S3 Pro (EU) V1.0_20190606 ROM - SPFT + OTA release

bencebacsi Post time 2019-6-16 20:45:51 From the mobile phone | Show all posts [Copy link]
33 1947
View: 1947|Reply: 33

UMIDIGI S3 Pro (EU) V1.0_20190606 ROM - SPFT + OTA release

[Copy link]
Post time 2019-6-7 14:46:31 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.0_20190606 system software
for UMIDIGI S3 Pro
(European version)


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI S3 Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • WiFi Calling bug fixed
  • Stock ringtone library updated
  • Slow RAM (low banchmark results) issue fixed
  • Battery technology changed to Li-Po
  • Touch screen freezing issue fixed
  • New camera features & improvements (Night mode, AI scenes, Qmoji detection etc.)
  • Video camera auto focus enabled
  • Corrections in Russian UI
  • Other minor bug fixes and system optimizations



The system will show UMIDIGI_S3_Pro_V1.0_20190522 as Build number after this update but the real version is V1.0_20190606
FOTA version: UMIDIGI_S3_Pro.E_V1.0_20190522_20190606-2145


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6771_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI S3 Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI S3 Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------

OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal storage of your phone
  • Go to Settings --> System --> --> Advanced --> About phone --> Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update:
Full flash update, it can update any version

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts (the boot screen is displayed), then immeduately release the power button and keep only the vol-up button pressed until your phone boots into recovery. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can see a lying android figure with an exclamation mark in red triangle on its tummy and 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release first the vol-up button to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
 Author| Post time 2019-6-16 05:19:02 | Show all posts
Dear Users,

If you have freezing touch screen issues (only in that case) and EU version software running on your phone, please install the following OTA update manually.
UMIDIGI_S3_Pro.E_V1.0_20190522_20190615-1043_update.zip
Please come back to the forum with your feedback.

0

threads

8

posts

26

credits

New Member

Rank: 1

credits
26
Post time 2019-6-8 15:17:48 | Show all posts
Hi Umidigi I have a s3pro phone after updating to the latest firmware version there are problems with the camera when it is increased to 8x, it just freezes, there is also a problem with the screen hanging, the interface is still slow, the screen rotation also works slowly, will it be fixed ?

0

threads

2

posts

30

credits

New Member

Rank: 1

credits
30
Post time 2019-6-9 11:34:03 From the mobile phone | Show all posts
Just installed latest update.
  Recovery shows error , unless you remove the external sdcard
Then install works as it should

Comments

Buy a better quality SD card from trusted source.  Post time 2019-6-16 05:18

0

threads

4

posts

16

credits

New Member

Rank: 1

credits
16
Post time 2019-6-9 21:20:58 | Show all posts
I have installes update via OTA, everything works fine.

I hoped for the camera 48MP 16:9.

Is this still going to happen?

0

threads

4

posts

16

credits

New Member

Rank: 1

credits
16
Post time 2019-6-9 22:33:26 | Show all posts
No issues with the scond camera app, no freezes and no screen hanging, everything works fast! incl. screen rotating

0

threads

11

posts

56

credits

Senior Member

Rank: 2

credits
56
Post time 2019-6-11 01:39:02 | Show all posts
Installing the update just worked fine for me. Good improvments.

Keep up your work guys!

Greetings from germany,
Luis

PS.: Please update google security patch!

0

threads

39

posts

270

credits

Platinum Member

Rank: 3Rank: 3

credits
270
Post time 2019-6-11 02:37:37 | Show all posts
luisonumi replied at 2019-6-11 01:39
Installing the update just worked fine for me. Good improvments.

Keep up your work guys!

I second the patch update.

0

threads

11

posts

56

credits

Senior Member

Rank: 2

credits
56
Post time 2019-6-13 18:50:00 | Show all posts
Touchscreen freezing issue still existing for me (now happens a lot more often than before)

Greetings from Germany,
Luis

0

threads

15

posts

82

credits

Senior Member

Rank: 2

credits
82
Post time 2019-6-16 20:45:51 From the mobile phone | Show all posts
I have done the update UMIDIGI_S3_Pro.E_V1.0_20190522_20190615-1043_update.zip and nothink improve the freeze still there
1234Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list