UMIDIGI S3 Pro (EU) V1.0_20190430 ROM - SPFT + OTA release

bencebacsi Post time 2021-6-28 15:28:14 | Show all posts [Copy link]
6 4439
View: 4439|Reply: 6

UMIDIGI S3 Pro (EU) V1.0_20190430 ROM - SPFT + OTA release

[Copy link]
Post time 2019-5-2 04:58:24 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.0_20190430 system software
for UMIDIGI S3 Pro
(European version)


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI S3 Pro receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.




Changelog:
  • Percentage added to the status bar battery icon
  • Updated APN settings
  • Updated audio parameters
  • Camera improvements
  • Minor bug fixes and system improvements



The system will show UMIDIGI_S3_Pro_V1.0_20190419 as Build number after this update but the real version is V1.0_20190430
FOTA version: UMIDIGI_S3_Pro.E_V1.0_20190419_20190430-2205


--------------------------------------------------------------------------------
SP Flash Tool
Resources:


Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6771_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it (if your computer is connected to the internet) or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe


Here's an optional solution to start the flashing process on your UMIDIGI S3 Pro if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI S3 Pro to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------

OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to the internal storage of your phone
  • Go to Settings --> System --> --> Advanced --> About phone --> Wireless update
  • Tap the 3-dot menu button in the top right corner and select Local Updates
  • Brows for the ...update.zip file and select it
  • Select INSTALL NOW, then OK in the Warning window. Your phone reboots into recovery, the update gets installed, then your phone boots into Android. Your updated system is ready to use.

Update file for manual OTA update:
It can update version 20190412 only

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card.
  • Press and hold the volume-up and power buttons together until your phone restarts (the boot screen is displayed), then immeduately release the power button and keep only the vol-up button pressed until your phone boots into recovery. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can see a lying android figure with an exclamation mark in red triangle on its tummy and 'No command'.
  • Press and hold the power and vol-up buttons (in this order) together, then release first the vol-up button to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.
 Author| Post time 2019-5-25 05:50:48 | Show all posts
0511 beta version with new camera app and drivers is available here: https://community.umidigi.com/fo ... hread&tid=18746

0

threads

9

posts

83

credits

Senior Member

Rank: 2

credits
83
Post time 2019-5-10 18:30:07 | Show all posts
I can't download the manuel ota update. I got an fail on the site.

0

threads

1

posts

6

credits

New Member

Rank: 1

credits
6
Post time 2019-5-23 23:59:40 | Show all posts
Edited by tuterkamor at 2019-5-24 01:27  

Thank you. I managed to repair my device with this rom and flash tool after it got stuck on umidigi logo power cycle.

0

threads

31

posts

200

credits

Platinum Member

Rank: 3Rank: 3

credits
200
Post time 2019-6-6 03:52:14 | Show all posts
Edited by roberts at 2019-6-6 04:06  

I recieved today new S3 Pro with this OTA release, but UI perfomance is worse than F1, same Antutu benchmark is much worse. I expect antutu score about 150000.I attach screenshots from S3 pro [img][img]. Evidently Im not alone (9:30): https://www.youtube.com/watch?v=ldfISdeWOnc
Factory reset was without effect.
Please for fix. I saw that score of previous software version was about 150000.


Screenshot_20190605-180322-S3.png

antutu result

antutu result

0

threads

46

posts

314

credits

Platinum Member

Rank: 3Rank: 3

credits
314
Post time 2019-6-7 05:08:25 | Show all posts
antutu.png

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2021-6-28 15:28:14 | Show all posts
Try Offer a stable android nine rom because i have updated (firmware improve) my phone with all of the roms you uploaded up to now but my apps continues crashing, and currently my smartphone have ran into eternal boot loop no matter the rom i installation as you can read instructions.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list