Z2 Original

bencebacsi Post time 2019-2-21 03:35:59 | Show all posts  Close [Copy link]
63 22890
View: 22890|Reply: 63

Z2 Original

 Close [Copy link]
Post time 2019-2-20 11:19:01 | Show all posts |Read mode
Z2.png
This is the SP Flash Tool release of the
V1.0_20190214 system software
for UMIDIGI Z2 Original version
210448csa6d6bk362z74ow.jpg

Click on the picture for an enlarged view

Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!

UMIDIGI Z2 receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with SPFT is the only option to repair (replace) damaged system software.





Changelog:
  • Camera focus issues fixed
  • Slippery Gesture customization added



The system will show UMIDIGI_Z2_V1.0_20180622 as Build number after this update but the real version is V1.0_20190214.
FOTA version: UMIDIGI_Z2_V1.0_20180622_20190214-1711


--------------------------------------------------------------------------------
SP Flash Tool
Resources:

Flashtool tutorial: http://bit.ly/SPFTguide

Extract the .rar file before use. The scatter file (MT6763_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.


Here's an optional solution to start the flashing process on your UMIDIGI Z2 if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI Z2 to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2019-6-28 00:43:25 | Show all posts
Please update to andorid Pie!! im still waiting!!!!   

0

threads

20

posts

82

credits

Senior Member

Rank: 2

credits
82
Post time 2019-3-16 13:31:50 | Show all posts
Still no news about the bad working Camera Focus after last 2019 update !
The focus only works good with first stock rom V1.0_20180625 ROM - SPFT release !!
So it is a SOFTWARE problem !
the are all sleeping at Umidigi, bad customer service !
 Author| Post time 2019-3-5 06:47:13 | Show all posts
Paradiso.swiss replied at 2019-2-28 16:39
Someone has the problem of low level of the microphone? When i'm on call i have always to be very cl ...

1. Open the Phone app, tap the 3-dot menu button in the top right corner, then select Settings.
2. Select Accessibility, and disable Noise reduction. Now try to make a phone call.

0

threads

20

posts

82

credits

Senior Member

Rank: 2

credits
82
Post time 2019-2-20 15:37:15 | Show all posts
Are there users here that can confirm that the Camera Focus is working 100% after this update Z2 V1.0_20190214 ??
Post time 2019-2-20 15:19:19 | Show all posts
Hi,
I have updated it via OTA. The wifi won`t turn on. If i activate the wifi immediately after it return to off.
If i flash it via SP Tool can the problem be solved?

Thanks

0

threads

3

posts

14

credits

New Member

Rank: 1

credits
14
Post time 2019-2-20 18:23:08 | Show all posts
I hadn't "extreme" problems with the camera focus as other users described but it was always really hard for my phone to focus close objects. This seems now fixed/fixed more and only fails in a "normally acceptable" frequency.

0

threads

15

posts

56

credits

Senior Member

Rank: 2

credits
56
Post time 2019-2-20 18:48:27 | Show all posts
A problem here on Z2 Original using FOTA.

Installed FW: UMIDIGI_Z2_V1.0_20180622_20181016-1652,
found update UMIDIGI_Z2_V1.0_20180622_20190214-1711/209.06 MB.

Download seems going fine to 100%, then start decompressing but it jumps from
20% to 62% and immediately phone reboots reporting an error with dead robot,
then phone reboot again with old firmware.

NO Root, NO SD.

I had the same problem when 20181016-1652 was released, fixed few days later
using FOTA as before. It seems to me an error on compressed file structure.

0

threads

3

posts

22

credits

Non- Vertification

credits
22
Post time 2019-2-20 18:49:19 | Show all posts
Not being able to update.. It gives an error at the beginning of the installation and phone reboots.. I currently have version UMIDIGI_Z2_V1.0_20180622.

Is it happening to anyone else? Any solutions? Thanks

0

threads

20

posts

82

credits

Senior Member

Rank: 2

credits
82
Post time 2019-2-20 19:55:54 | Show all posts
When I update via OTA to V1.0_20190214 the Z2 says FAIL !!
Also when I do a local update with V1.0_20190214 Fails !!
There is a problem with the update zip file

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2019-2-21 00:51:19 | Show all posts
Marten replied at 2019-2-20 19:55
When I update via OTA to V1.0_20190214 the Z2 says FAIL !!
Also when I do a local update with V1.0_2 ...

acontece o mesmo, diz erro !
 Author| Post time 2019-2-21 03:32:01 | Show all posts
Paradiso.swiss replied at 2019-2-20 15:19
Hi,
I have updated it via OTA. The wifi won`t turn on. If i activate the wifi immediately after it r ...

Hi, flashing may help but first just try to 'Reset Wi-Fi, mobile & Bluetooth' in 'Settings --> System --> Reset options'.
 Author| Post time 2019-2-21 03:35:59 | Show all posts
QMaxy replied at 2019-2-20 18:48
A problem here on Z2 Original using FOTA.

Installed FW: UMIDIGI_Z2_V1.0_20180622_20181016-1652,

Hi, The OTA update file is double checked and it works perfectly. Go to 'Settings --> Apps & notifications', tap the 3-dot menu button in the top right corner and select 'Show system'. Scroll down to the Wireless Update app, select it, then Storage and CLEAR DATA. Now try to download and install the wireless update file again. Otherwise you can flash your phone with SP Flash Tool.
1234567Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list