Root your UMIDIGI with Magisk Manager

bencebacsi Post time 2018-9-21 04:05:52 | Show all posts    Close [Copy link]
61 82896
View: 82896|Reply: 61

Root your UMIDIGI with Magisk Manager

   Close [Copy link]
Post time 2018-9-10 05:42:30 | Show all posts |Read mode
How to get root access on any UMIDIGI smartphones without loosing your data with Magisk Manager

magisk.png

This tutorial will guide you through the process of installing Magisk Manager and a patched boot.img to get root access on your UMIDIGI smartphone.
UMI OS based phones with Efuse partition protection (UMIDIGI S, C2, S2 Pro and new Z1 Pro) can not get root access, patched boot.img files can not be flashed!

Updated: 2021, September 24



What you need:

Driver for Preloader USB VCOM mode: Windows 10 can automatically install it. Please make sure that your Windows is logged in with administrator rights and your computer has a working internet connection when first time connecting your phone.

SP Flash Tool application: SP_Flash_Tool_v5.2124.rar

The same version of SPFT ROM package that you have installed on your device; you can find and download it in the ROM section.

Magisk Manager: MagiskManager-v8.0.7.apk or you can find the latest version HERE





- Charge the battery of your phone to at least 50% before starting this process.
- Your phone must be connected to the internet.
- It is recommended to use a PC/laptop with 64-bit Windows 10 operating system, other Windows versions may not work correctly. 32-bit Windows 7-10 versions are not compatible, 32-bit Windows XP may work but not guaranteed. Your PC must be connected to the internet to be able to automatically download the compatible drivers. You must be logged in as an administrator.
- For Android 9 phones, visit the following thread: UMIDIGI Android 9.0 ROOT
- For Android 10 and 11 phones, visit the following thread: UMIDIGI Android 10 & 11 ROOT


1. Download the Magisk Manager apk file, and copy it to either the internal storage of your phone or to the SD card if you have one installed in your phone.

2. Extract the downloaded ROM package and copy the boot.img file from its folder to the internal storage or SD card of your phone.

3. Install Magisk Manager from the stock File Manager on your phone.

4. Open Magisk Manager on your phone. The app will ask you to install the latest available Magisk-vXXX.zip. Select INSTALL, then select 'Patch Boot Image File'.
1.jpg


5. The next screen is the file manager. If you copied the boot.img file to the internal storage, tap the 3-dot menu button in the top right corner, then select 'Show internal storage'.
Tap the 3-stripe menu button in the top left corner, and select either the internal storage (your phone's name) or the SD card, according to the location of your boot.img file.
2.jpg
Brows for your boot.img file and select it.


6. The ''Flashing'' process will automatically start, and finally a patched_boot.img or magisk_patched.img file will be created in the Download directory of the internal storage of your phone. After a successful process, you will see the following screen.
3.jpg
Select CLOSE and you may exit from Magisk Manager.
Troubleshooting: If the flashing process fails, you can do the followings.
a) Uninstall Magisk Manager
b) Download and install an older version of Magisk Manager
c) Run the app and let it update itself
d) Start again from point 4.


7. Copy the patched boot.img file to your computer. It is recommended to copy it into the ROM folder for easier operation.
Troubleshooting: First you might need to reboot your phone or move the patched_boot.img file to a different location (for example to the root of your phone storage) or the Windows file manager (MTP browser) may not see it in the Download directory.

4.jpg


8. Power off your phone. After your phone's screen turned into black, please wait for more 30 seconds before stepping further.
Advice: If you've never connected your powered off phone to your computer via USB before, first please connect it now for 10 seconds, then disconnect.


9. Extract the SP_Flash_Tool rar file and run flash_tool.exe.

10. Open the scatter file, that you can find in the ROM folder.
5.jpg


11. Leave only the boot line checked, then click on its Location field and brows for the patched boot.img file.
6.jpg


Warning! The next step will void the warranty of your phone! Your seller is allowed to refuse to process any warranty case if your phone contains modified system software.

12. Click on the Download button and connect your phone to a USB port of your computer. The flashing process will start automatically and it needs just a few seconds to be done.*
     *At some models you have to press one of the volume buttons while connecting to USB but most of them don't need it and you mustn't press any of the buttons.
7.jpg


13. Now the patched boot.img has been flashed. You may remove the USB cable. Power on your phone and let the Android system boot up.

14. Open Magisk Manager. Now your phone has permanent root access and Superuser is installed.
8.jpg


If you need it, now you can flash a custom recovery on your phone.
If you need to unroot your phone, just simply flash the full ROM with the original factory files in Firmware Upgrade mode - your user data will be erased. That will restore the warranty state of your device as well. If you have an Android 9.0 or newer phone, you also need to re-lock the bootloader.

Credits to topjohnwu at forum.xda-developers.com



All the screenshots are captured and the guide is written by me for UMIDIGI users. Unauthorized copy of this content is prohibited.

Please let me know if you find errors or missing info.

Thank you for your attention,
bencebacsi

0

threads

1

posts

74

credits

Non- Vertification

credits
74
Post time 2019-5-11 08:57:07 From the mobile phone | Show all posts
I get an error msg https://i.vgy.me/N2yqAs.png

Smart Phone Flash Tool
ERROR : STATUS_SEC_INSUFFICIENT_BUFFER (0xC002004B)

[HINT]:
Verified boot is enabled.
Please download signed image(boot-verified.img) or disable verified boot.

Comments

You have an Android 9.0 phone but forgot to unlock the bootloader first.  Post time 2019-7-24 21:59

0

threads

4

posts

28

credits

New Member

Rank: 1

credits
28
Post time 2018-10-15 13:38:26 | Show all posts
install the Update, flash the patched boot.img to device again. Done.
 Author| Post time 2018-9-21 00:32:03 | Show all posts
BPNL replied at 2018-9-20 19:52
Will this work on the z2 pro to?

Yes of course, it will.

1

threads

34

posts

212

credits

Platinum Member

Rank: 3Rank: 3

credits
212
Post time 2018-9-15 03:07:14 | Show all posts
Edited by guidoignacio at 2018-9-15 03:08 \n\nWhy /data is not mounted in TWRP?
photo_2018-08-28_11-07-52.jpg
 Author| Post time 2018-9-15 05:30:35 | Show all posts
guidoignacio replied at 2018-9-15 03:07
Edited by guidoignacio at 2018-9-15 03:08 \n\nWhy /data is not mounted in TWRP?

Go to the TWRP thread, you'll find the answer there.
Link: http://community.umidigi.com/for ... thread&tid=2962

0

threads

4

posts

28

credits

New Member

Rank: 1

credits
28
Post time 2018-9-18 14:24:38 | Show all posts
Edited by Pony at 2018-9-18 14:40 \n\nin FlashTool it only gets "red" and nothing further. Seems that the Download was ok, but it doesnt show "Download OK"-Window at the End, Tool freezes.
Tried different Versions of FlashTool, not sure if Windows took the Drivers correct (MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe).
Any Suggestions?
 Author| Post time 2018-9-19 06:58:02 | Show all posts
Pony replied at 2018-9-18 14:24
Edited by Pony at 2018-9-18 14:40 \n\nin FlashTool it only gets "red" and nothing further. Seems th ...

Hi, What Windows version do you have?

0

threads

4

posts

28

credits

New Member

Rank: 1

credits
28
Post time 2018-9-20 13:41:38 | Show all posts
Hi bencebasci, now i got it. It was a Problem for Windows 7 (64) to take the Drivers correctly, at least i got it to work, the Phone is rooted now successfully. I had to disable searching for Driver-Updates at Windows-Update, maybe this works for others too.
Are there any Custom Roms for the Z2?

0

threads

31

posts

281

credits

Platinum Member

Rank: 3Rank: 3

credits
281
Post time 2018-9-20 19:52:55 From the mobile phone | Show all posts
Will this work on the z2 pro to?
 Author| Post time 2018-9-21 00:31:35 | Show all posts
Pony replied at 2018-9-20 13:41
Hi bencebasci, now i got it. It was a Problem for Windows 7 (64) to take the Drivers correctly, at l ...

Hi Pony,
That's why I recommend to use Windows 10. There's a custom ROM here: https://forum.xda-developers.com ... 80726-base-t3835275

1

threads

34

posts

212

credits

Platinum Member

Rank: 3Rank: 3

credits
212
Post time 2018-9-21 04:05:52 | Show all posts
bencebacsi replied at 2018-9-15 05:30
Go to the TWRP thread, you'll find the answer there.
Link: http://community.umidigi.com/forum.php? ...

yes this "You have to format the data partition to be able to access it"

If, but after formatting the data partition, starting the system, configuring from zero and returning to twrp the partition is again inaccessible, the solution does not make sense.
123456Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list