UMIDIGI Crystal V1.0_20170925 NEW ROM - SPFT release

bencebacsi Post time 2017-10-17 08:03:47 | Show all posts |Read mode [Copy link]
0 1445
View: 1445|Reply: 0

UMIDIGI Crystal V1.0_20170925 NEW ROM - SPFT release

[Copy link]
Post time 2017-10-17 08:03:47 | Show all posts |Read mode
This is the SP Flash Tool release of the
V1.0_20170925 system software
for UMIDIGI Crystal 2GB

This ROM is only for the 2GB version with MT6737T SoC and new screen and camera hardware. The screen still can work on older devices but the camera may produce bad colors.

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI Crystal receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.





Changelog:
Not provided


--------------------------------------------------------------------------------
SP Flash Tool
Resources:

Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

Extract the .rar file before use. The scatter file (MT6737T_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI Crystal if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI Crystal to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list