UMI eMax wf-fi prefix or NVRAM RF calibrations

Goga39

Does anybody know UMI eMax wi-fi prefix or have stock ROM with RF calibrations??

bencebacsi

Check the following page for a possible solution: http://community.umidigi.com/for ... peid%26typeid%3D106

rameshpatel1

\n\nHello,

I have the same problem.

I made a bad flashing and corrupted the nvram, and now simcards are not detected (no mobile network/imei/baseband).

Is there a stock nvram for the Umi eMax, so i can reenable mobile radio and set original imei and use the "phone" as a phone.

Thanks

micro77

for fix "NVRAM WARNING: Err = 0x10 " error on wifi settings

please download this file ;

http://www.mediafire.com/download/j1fjd7vik75q2ug/wifi.rar

and extract phone memory

and copy two file with adb  ;

#   adb shell

#   su

#   cp  /sdcard/WIFI_CUSTOM  /data/nvram/APCFG/APRDEB/WIFI_CUSTOM

#   cp  /sdcard/WIFI   /data/nvram/APCFG/APRDEB/WIFI

#   reboot

Goga39

micro77 replied at 2016-3-6 03:20
for fix "NVRAM WARNING: Err = 0x10 " error on wifi settings

please download this file ;

  Thks  

kurgan116

Good afternoon.
Help me please. In
I have a phone, UMI Emax, about three months ago I reflash its introduction VIBeMAX_V01, worked great. But this morning, I found that it is turned off, though, when the battery was 30% went to bed. I connected to a charger, and when I went to work with their visors charge of about 40%, and having just arrived at work, I learned that no one, this card does not catch network and the memory card is moved too. At work, I have to flash it on Native KitKat version 5 (I was buying when version 3), but it does not work, the phone works as normal, off and on maps, it sees, but absolutely do not accept the signal. And even when connected to a computer it is defined as Lenovo P70-A / Now
Prompt, what is it can be and how to fix it.
Really looking forward to the answer.
Thanks in advance.
And it seems that I have a swollen battery

Angel_UMI

kurgan116 replied at 2016-4-28 21:29
Good afternoon.
Help me please. In
I have a phone, UMI Emax, about three months ago I reflash its in ...

Hi,

One question. SIM card is detected? Can you enter your pin code and problem is that there is no signal? Or is like SIM card is not inserted?

kurgan116

Angel_UMI replied at 2016-4-29 00:42
Hi,

One question. SIM card is detected? Can you enter your pin code and problem is that there is  ...

детектирует SIM-карты и идентифицирует, но нет никакого сигнала, вместо IMEI. Может быть, что-то с модулем связи или плохой батареи опухшие, что поврежден. все остальные функции работают, как и раньше.

kurgan116

Angel_UMI replied at 2016-4-29 00:42
Hi,

One question. SIM card is detected? Can you enter your pin code and problem is that there is  ...

SIM card detects and identifies , but there is no signal , imei in place. Maybe something with a communication module , or a bad battery is swollen what is damaged . all other functions operate as before .

kurgan116

Angel_UMI replied at 2016-4-29 00:42
Hi,

One question. SIM card is detected? Can you enter your pin code and problem is that there is  ...

two SIM cards inserted . phone defines them and see . but there is no call for the network