Umi iron pro, not released

PelaMartinez

bencebacsi  said:
"...Maybe simply the GSM antenna is not connected to the motherboard by a bad assembly or an accidental collision. If you've tried everything on the software side, I'd disassemble your phone to check it."

+1

PelaMartinez

bencebacsi  sayd:
"...Maybe simply the GSM antenna is not connected to the motherboard by a bad assembly or an accidental collision. If you've tried everything on the software side, I'd disassemble your phone to check it."

+1

cardiel

In regards to dismantle?
Yes, I've done everything I have suggested to me and nothing has happened even want to make the emergency call and does not allow me at all, I have tried several chips of various operators and nothing that I can I do?

loco026

Here you can see how  is, disarmed umi iron

https://www.youtube.com/watch?v=vvEF9RToYLg

cardiel

I'll do what you ask me today and I will show if there is any problem with the antenna, for my part do not use cell and has never fallen me, is totally perfect wine in new box. Yet I will be reporting what happens to equipment disassembly

cardiel

This antenna is the truth, the person pointing disassembling the phone ..?

cardiel

Nothing, and I did everything perfectly is connected, no loose parts, there is nothing off, I had to wait to have this phone and it is not fair that we can not use at this point, what else I can do, I dismounted and says in the video already prendi and no signal.

cardiel

Hello, can you help me?

cardiel

Hi, I will answer,?

Renevn

Hola, Cardiel, since you are here in DIY PRO section, go to Ajustes then go to Uso de datos, there you see informacion general y Movistar (for me it is KPN) Go to movistar and there you switch datos móviles you can also switch Establecer límite datos, but isn't nescessery, now your data traffic should work. I don't no where you live in Spain, you can check this http://opensignal.com/coverage-maps/Spain/ And Movistar works with baseband 3 and 7 so this would not be a problem. (And if your imei is correct youdon't have to put it there again with AT+ commands good is good. Succes.