[2020 models] UMIDIGI A7 PRO 64GB V3.0_20210330 ROM - SPFT + OTA release

bencebacsi Post time 2021-5-5 15:58:29 | Show all posts  Close [Copy link]
31 13797
Author: bencebacsi

[2020 models] UMIDIGI A7 PRO 64GB V3.0_20210330 ROM - SPFT + OTA release

 Close [Copy link]
 Author| Post time 2021-4-19 10:28:21 | Show all posts
prymoo replied at 2021-4-18 04:01
What about EEA version of this ROM, will it be released? I'm still stuck on EEA_V3.0_20201025 and my ...

The EEA version of the A7 Pro may or may not receive this or further updates, currently I can neither confirm nor refute that. The EEA and global versions are perfectly compatible, it's only not allowed for a distributor to sell a phone with global version in the EEA region but as an end-user, you can install any official and compatible software version on your phone.

0

threads

3

posts

35

credits

New Member

Rank: 1

credits
35
Post time 2021-4-19 23:08:34 | Show all posts
The EEA and global versions are perfectly compatible, it's only not allowed for a distributor to sell a phone with global version in the EEA region but as an end-user, you can install any official and compatible software version on your phone.


That's great news! Could you tell me how should I approach the conversion from EEA_V3.0_20201025 to non-EEA firmware? Should I use SP Flash Tool method from the first post?
 Author| Post time 2021-4-20 17:34:58 | Show all posts
prymoo replied at 2021-4-19 23:08
That's great news! Could you tell me how should I approach the conversion from EEA_V3.0_20201025 t ...

Yes, you can make it done only with SPFT but you can flash without the userdata partition.

0

threads

1

posts

4

credits

New Member

Rank: 1

credits
4
Post time 2021-4-20 19:14:38 | Show all posts
Here is giving error when trying to update via wifi or by the file in the manual

0

threads

1

posts

18

credits

New Member

Rank: 1

credits
18
Post time 2021-4-25 05:19:41 | Show all posts
Hi, I cannot apply this update to my A7 Pro 64GB phone which is currently running version:
UMIDIGI_A7 Pro_V3.0_20201213

I've tried updating the over-the-air download as well as copying the UMIDIGI_A7_PRO_V3.0_20210330_update.zip file to the phone's local storage and installing that way.  In both cases the update is unzipped successfully and the phone restarts in recovery mode.  The installation begins and the progress bar gets about 25-30% before it stalls for maybe 20 seconds before it switches to the green Android guy laying on his back with a red triangle above his torso with the word Error below the image.  A few seconds later the phone restarts again and boots up fine, but I am still running UMIDIGI_A7 Pro_V3.0_20201213.

I have applied at least 3 or 4 over-the-air updates to this phone over the last year without incident.  Any tips on how to proceed would be appreciated.

Thanks!

0

threads

32

posts

190

credits

Senior Member

Rank: 2

credits
190
Post time 2021-4-27 00:13:25 | Show all posts
Update by using a Computer.

Cheers
3Fees

0

threads

32

posts

190

credits

Senior Member

Rank: 2

credits
190
Post time 2021-4-30 01:53:07 | Show all posts
When is UMIDIGI coming out with 5G Pro Phones ? 5G is now.. I want one..

Cheers
3Fees

0

threads

7

posts

34

credits

New Member

Rank: 1

credits
34
Post time 2021-4-30 11:47:01 | Show all posts
Edited by NE1 at 2021-4-30 11:48  

After updating with OTA update this rom has made my A7 Pro no longer able to connect to any device via bluetooth. This started immediately after the update. What can I do to fix this?  

0

threads

7

posts

34

credits

New Member

Rank: 1

credits
34
Post time 2021-5-2 13:02:48 | Show all posts
Edited by NE1 at 2021-5-3 02:56  



This is an update to my previous post above. After receiving no help support here, I decided to go at it alone as I really need my Bluetooth working to connect to my car when making calls. First thing I tried was the manual OTA update with the V3-0_20210330 ROM, this did not fix anything. I then did the SPF tool with the "Download" only option and the V3-0_20210330 ROM, this also did nothing. I then used the SPF tool with the "Firmware Upgrade" option and the V3-0_20210330 ROM, once again this fixed NOTHING!

After 3 failed attempts I decided to downgrade the ROM to the previous version that was working, which for me was V3-0_20201213. I once again used the SPF tool and did the "Firmware Upgrade" option and to my supersize... THIS WORKED! I can now use Bluetooth again. Now I just need to figure out how to turn off OTA updates until Umidigi resolves this.  

So, Umidigi it appears you have a bug in your current ROM version for the A7 Pro that cripples Bluetooth, at least for me. I see no other reports of this so I wonder what is going on.

0

threads

7

posts

36

credits

New Member

Rank: 1

credits
36
Post time 2021-5-5 15:58:29 | Show all posts
prymoo replied at 2021-4-19 02:21
Can we update to the non-EEA version by flashing? Or is it dangerous?

Hello, yes you can , just update from EEV to this global -V3.0_20210330- and all works  fine.
1234Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list