UMIDIGI A5 Pro (EU) V1.4_20190829 ROM - SPFT + OTA release

xicofaro

Very very disappointed. Camera is worth. Sun color is red not orange. The phone is slower. How can i regress to another update, like the one before? Here is 2 photos, one with last update and one from tiday

snzuev

Гироскоп будет работать без дерганья? Фокусировку в камере ещё нужно доработать!

dnbx

gomax1 replied at 2019-9-2 06:05

LOOK AT ANSWER!!

dnbx

When Front camera will be fixed???

bencebacsi

gomax1 replied at 2019-9-2 06:05

You have a phone with unlocked bootloader, rooted system (patched boot.img) and TWRP recovery. Do you really want to update it with a stock OTA update?

bencebacsi

dnbx replied at 2019-9-2 17:39
When Front camera will be fixed???

Flash your phone with SPFT in firmware upgrade mode. If that doesn't help, then your phone is hardware defective. Don't wait for an update but contact your seller to make your phone repaired or replaced.

peter007

yes the opening of the application is delayed by 3-4 sec. a sun color is red not orange in the early evening

dnbx

bencebacsi replied at 2019-9-2 18:07
Flash your phone with SPFT in firmware upgrade mode. If that doesn't help, then your phone is hard ...

already tried. It’s strange that the camera worked out of the box, and after the updates it already stopped working.
maybe there’s some way to determine where the problem is? in software or hardware

xicofaro

There is 2 photos.  All of 2 was taken at Sundown

bencebacsi

dnbx replied at 2019-9-2 20:06
already tried. It’s strange that the camera worked out of the box, and after the updates it alread ...

You can try to perform a factory data reset, then setup your phone as a new device without restoring your apps and settings. First try the camera before installing anything. If it still doesn't work, then it's a hardware issue. Maybe just the camera ribbon cable needs to be reconnected, maybe the camera module itself is defective. We can't know without disassembling your phone. You also can test all the four cameras separately in factory mode. Dial * # * # 66 # * # * then SINGLE Test.