|
This is the SP Flash Tool release of the V3.01_20170106 firmware for UMI Z
Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process! UMI Z receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.
Changelog:
Resources:
ROM: 20170106_g15v97_kw_u8_4m.rar - Extract the .rar file before use. The scatter file (MT6797_Android_scatter.txt) is inside the extracted folder, together with the other elements
Here's an optional solution to start the flashing process on your UMI Z if the standard method doesn't work. It's especially useful if your phone is bricked or is stuck in bootloop 1. Connect your UMI Z to USB. 2. Start the flashing process with the Download button in the flasher app. 3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds. 4. Wait until the flashing process finishes.
| 
[Copy link]
Peep Card
Radar card
Post time 2017-1-9 15:41:41
Riser card
Top Cards
Silent card
Noise card
Highlight card
Jack
Magic mirror
Post time 2017-2-19 08:38:10
Author