Umi Touch Problems of Heat

bencebacsi

Dear users,

After thorough testing, any general software or hardware issue, that can cause over heating of the CPU cannot be confirmed.
Please, test and measure your devices with specific test tools (some examples are mentioned above), not with your hand.
to rule out any possible software defections, I suggest you to flash your phone with SP Flash Tool.
You can find the latest version here: http://community.umidigi.com/thread-2939-1-1.html
Here's a screen video of a 15 minutes AnTuTu stress test on a UMI Touch
https://dl.dropboxusercontent.co ... _05_14_15_19_44.mp4

Shooker

Dear, I am also have no problem of heating in Antutu stress test!! BUT in regular use UMI becomes too hot after 3G or wi-fi use, do something. Also I am waiting for a touch sensor as a HOME button without pushing on it! And the front flash as a notice indicator as a function in new ROM update. THANK YOU<>

florinmaxim

He jumped at me a few times we had 70 C * and 72 C *
Sorry but it does not antireclama Touch is a total failure built in haste and without testing

bencebacsi

\n\n

florinmaxim replied at 2016-5-15 17:35
He jumped at me a few times we had 70 C * and 72 C *
Sorry but it does not antireclama Touch is a t ...

Very great! At peak points it even would be allowed to hit the 100 °C for very short times. If the maximum was 71 °C in your device, then your phone has absolutely no over heating issues. Of course, you can write here anything.
I've attached a screenshot showing a peak point of a UMI eMax. That phone has been in hard use for 10 months already, without any issues.
This thread is closed.