UMIDIGI Note 100A E_V1.0_20250606 ROM - SPD release

bencebacsi

This is the SPD Flash Tool release of the
E_V1.0_20250606 system software
for UMIDIGI Note 100A

European version for EEA countries


Flash tool operation is recommended to experienced users only. If you are not yet an experienced flash tool user, please carefully read the SPD flash tool tutorial before proceeding, and strictly follow each instruction.

Except if an authorized or responsible expert directly asked you to do that,
never format the flash chip of your device or you instantly lose your warranty!


UMIDIGI Note 100A receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again. Moreover, flashing with an SPD flasher is the only option to repair (replace) damaged system software.

SPD Flash Tool resources

Flashtool tutorial: https://bit.ly/SPDguide

ROM: >>> UMIDIGI_Note_100A.E_V1.0_20250606_1144.pac.7z <<<

Extract the .7z file to get the .pac file for flashing

SPD Upgrade tool: SPD_Upgrade_Tool_R27.24.2301.rar

SPD drivers: SPD_Driver_R4.20.4201.rar


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with an SPD Flasher. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones

Rotl

This is the official SPD Flash Tool release for the UMIDIGI Note 100A (EEA version). It’s mainly for recovery or clean installs if the device is bricked or not getting FOTA updates. Flashing should only be done by experienced users using the SPD guide and proper drivers. Regular users can just wait for OTA updates — flashing manually isn’t needed unless there’s a major issue.