[2017 models] UMIDIGI C NOTE V1.2_20170510 ROM - SPFT + OTA release

bencebacsi Post time 2017-6-3 04:08:25 | Show all posts  Close [Copy link]
12 7383
View: 7383|Reply: 12

[2017 models] UMIDIGI C NOTE V1.2_20170510 ROM - SPFT + OTA release

 Close [Copy link]
Post time 2017-5-12 03:05:33 | Show all posts |Read mode
This is the SP Flash Tool + OTA release of the
V1.2_20170510 firmware
for UMIDIGI C NOTE


Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!
UMIDIGI C NOTE receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.





Changelog:
  • Optimized audio, handset and amplifier noise issues fixed


--------------------------------------------------------------------------------
SP Flash Tool
Resources:
Flashtool tutorials: UMI Forum or androidxda guide or YouTube guide (you can google a lot of other solutions and guides)

>>>>> ROM: mt6737n_n383bt_u41aa_kewei_cc_20170510-080602.rar <<<<< - Extract the .rar file before use. The scatter file (MT6737T_Android_scatter.txt) is inside the extracted folder, together with the other components


VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMIDIGI C NOTE if the standard method doesn't work.
It's especially useful if your phone is bricked or is stuck in bootloop
1. Connect your UMIDIGI C NOTE to USB.
2. Start the flashing process with the Download button in the flasher app.
3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.
4. Wait until the flashing process finishes.

--------------------------------------------------------------------------------
OTA (recovery) update
Manual (local) OTA update method instructions
  • Copy the downloaded .zip file to either the internal memory or the SD card of your phone
  • Go to Settings --> About phone --> Wireless update
  • Tap the 3-dot menu button at the top right corner and select Local updates
  • Brows for the ...update.zip file and select it
  • Tap Install now, comfirm the process with OK and wait until the process will be finished

>>>>> Update file for manual OTA update: UMIDIGI_C_NOTE_V1.2_20170510_update.zip <<<<<

Optional method (in case if the manual OTA update gets stuck): Install from recovery
You need a microSD card (with at least 4GB capacity) installed in your phone!
  • Copy the ...update.zip file to your SD card
  • Press and hold the volume-up and power buttons together until your phone restarts in the boot selector mode. It needs about 10 seconds or a little bit less if your phone was already powered off.
  • Here you can move with the vol-up button and select an item with vol-down. Select Recovery.
  • Your phone reboots into Recovery and you see a lying android figure with an exclamation mark in red triangle on its tummy.
  • Press and hold the power and vol-up buttons (in this order) together, then release them to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
  • Move to ‘Apply update from SD card’ and select it.
  • On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
  • After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
  • Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'


Kind request from users:
Please report any kind of new issues you experience after installing this update only if you've already flashed this ROM with SP Flash Tool in Firmware Upgrade mode. In rare cases a FOTA update can cause more or less serious malfunctions but that means only the update process went wrong, not a badly developed ROM. An updated stock ROM, especially related to the basic functions will not cause any new issues but will solve some of the existing ones.

2

threads

14

posts

73

credits

Senior Member

Rank: 2

credits
73
Post time 2017-5-12 22:22:44 | Show all posts
There is another mistake. Bluetooth has disconnects. Music is played back with a Bluetooth device with crashes. If a call is accepted via a Bluetooth device with Bluetooth, then the call is often correct and is then redirected to the loudspeaker of the mobile phone and then Bluetooth crashes. Please fix asap the error with an update!

0

threads

7

posts

25

credits

New Member

Rank: 1

credits
25
Post time 2017-5-20 15:40:07 | Show all posts
Please provide a update for VoLTE(voice over LTE) support. So that we can use this latest technology for voice calling.

1

threads

27

posts

92

credits

Senior Member

Rank: 2

credits
92
Post time 2017-5-24 19:01:30 | Show all posts
And lag when scroll on display

2

threads

32

posts

195

credits

Senior Member

Rank: 2

credits
195

Warmest Heart UMIDIGIerUMIDIGIer

Post time 2017-5-26 02:03:41 | Show all posts
And screen sensibility......

0

threads

7

posts

25

credits

New Member

Rank: 1

credits
25
Post time 2017-5-30 15:19:02 | Show all posts
Can not connect to USB, what to do? Pls advice

1

threads

27

posts

92

credits

Senior Member

Rank: 2

credits
92
Post time 2017-6-1 14:20:51 | Show all posts
And the battery drain didn't fix I have a big problem with battery..

2

threads

17

posts

173

credits

Senior Member

Rank: 2

credits
173
Post time 2017-6-2 03:39:11 | Show all posts
I've also noticed battery drainage, in my case it started with 15%.
No other bugs or crashes have been founded by me so far, but I'm using it from few hours.
Thank You for the work, hope that crashes will be fixed someday.

2

threads

6

posts

30

credits

New Member

Rank: 1

credits
30
Post time 2017-6-2 05:58:35 | Show all posts
I've installed a SD card with 64 GB and formated it as internal storage. Now, after I copied all my data to the phone the storage tab in settings show 32.27 GB used from 32 GB. In my opinion, it should show 32.27 GB used from 96 GB. Or am I wrong.
And I'm missing these little indicator arrows that shows the Mobile Network Traffic, I know, it's a small thing. But it would be nice to have.

2

threads

17

posts

173

credits

Senior Member

Rank: 2

credits
173
Post time 2017-6-3 04:08:25 | Show all posts
Razorblade083 replied at 2017-6-2 05:58
I've installed a SD card with 64 GB and formated it as internal storage. Now, after I copied all my  ...

I'm having the same thing in my phone. It's just a bug, but SD card is writable all the time, even if You exceed 32 GB.
But still, it's another bug on "todo" list.

And from me - is it possible to have numbers with current download/upload speed in B/s, KB/s or MB/s, located close to network icon on right side of top bar?
I've had it in my previous Huawei G620S-L01, small eyecandy, but served me well.
12Next
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list