UMIDIGI London V3.03_20170307 ROM - SPFT release

bencebacsi

This is the SP Flash Tool version of the

V3.03_20170307 firmware

for UMi London

Flash tool operation is recommended for experienced users only. Do not use it if you cannot understand the whole process!

UMi London receives all updates automatically via FOTA method. You need this tool only in case of emergency (if you've bricked your phone), if you want to apply a clean install or if you want to clear all root access and custom recovery to make your phone able to receive FOTA updates again.

This one is an update under the new brand name 'UMIDIGI' and it won't be available via FOTA update (due to the brand change), you can flash it only with SP Flash Tool.

UMIDIGI London is not a different model, it's just a new brand. You can update your UMi London smartphone with this ROM without risking its usability and without voiding your warranty. It is an official update for UMi London.

If you are updating an earlier version, it is recommended to flash this ROM as 'Firmware Upgrade'!

Changelog:

• Camera compatibility
• Ringtong numbers restore the default numbers
• New brand: UMIDIGI
  

Resources:

Flashtool tutorial: http://community.umidigi.com/thread-16931-1-1.html

>>>>> ROM: w370_dj198010_wcdma_20170307_songlixin_PC.rar <<<<< - Extract the .rar file before use. The scatter file (MT6580_Android_scatter.txt) is inside the extracted folder, together with the other elements

SPFT: SP_Flash_Tool_v5.1828.rar

VCOM driver: Windows 10 already automatically can install it or you can use this: MTK_Driver_Auto_Installer_SP_Drivers_20160804.exe

Here's an optional solution to start the flashing process on your UMI London if the standard method doesn't work.

It's especially useful if your phone is bricked or is stuck in bootloop

1. Connect your UMI London to USB.

2. Start the flashing process with the Download button in the flasher app.

3. Press and keep pressed the power button of your phone until the flashing process starts (red bar appears at the bottom of the app window), then release it. In this process you have to keep the power button pressed for about 10 seconds.

4. Wait until the flashing process finishes.

Unreal95x

Can i also flash the preloader?

escape_kz

My recovery is in chines language. I can't wipe cash and data.

bencebacsi

Unreal95x replied at 2017-3-10 21:15
Can i also flash the preloader?

You always should flash the preloader since usually that also gets updated and keeping the old one may cause unexpected errors.

bencebacsi

escape_kz replied at 2017-3-10 23:06
My recovery is in chines language. I can't wipe cash and data.

Then you are probably in Factory mode, not in recovery. You can boot into recovery by powering on your phone with keeping the volume up and power buttons pressed together, then release the power button as soon as your phone has powered on but keep the volume up button pressed until you see the recovery screen.

escape_kz

Does anyone fix the problem with the screen? A lot of videos on youtube with this problem and no solutions.I've tried all ROM in the forum and the same problem.

escape_kz

https://www.youtube.com/results? ... ondon+touch+problem

saudinterzic116

when it will be available Android 7.0 for umi london

bencebacsi

saudinterzic116 replied at 2017-3-12 19:48
when it will be available Android 7.0 for umi london

Sorry but don't expect that. It's an entry level model.

bencebacsi

escape_kz replied at 2017-3-12 00:30
Does anyone fix the problem with the screen? A lot of videos on youtube with this problem and no sol ...

These are specific, hardware related issues. Such touch panels need to be repaired or replaced.