Super V7.01_20170123 Android 7.0 ROM - SPFT + OTA release

robsit

Peketr replied at 2017-1-28 01:54
I think you should try scrolling to the top of the list there should be a clear all button AFAIK

Right

Lorenzo1

\n\nWifi speed ??  I have 120 mb/s upc
older verzions 37-48 mbs

Makaveli

tysontaps replied at 2017-1-28 18:15
Thanks for the super support here in the forum - I have made it according to your description with ...

Enter engineer mode and turn up the default value as seen in the SS. Take it up to 220 on both NB and WB and you should be alright.

Simon91

Hi,

i flashed via OTA.
Everything is working fine, but my Phone is getting very hot and the Battery discharge faster then in Marshmallow.

Greetings
Simon

steve1215

Yay!  Alarms seem to be working again since flashing this 'first final' build.   Thanks guys.

levapz

Hello Ben or UMI engineer
I would like ask you for help with communication with the smartwatch (in my example bluetooth communication with oukitel A28).
I had hoped that with the arrive of Nougat will fix this - if I call or someone calling me, so when the call is made (or received) by phone, unfortunately, implicitly call is in progress over the bluetooth connection (watch) rather than over the phone. I checked with a friend who has the Huawei Watch that the call is in progress implicitly by phone device, which receives it (done).
I understand that for example in a car that probably man welcome, but when watches start talking it's annoying sounds. I have to uncomfortably touch display to search button to switch from three options (the default bluetooth, earphone or speakers) to earphone. I would prefer either option in the setup of phone to select bluetooth / earphone / speaker or implicitly have first earphone.
Second bad think for new Nougat is that notification on smartwatch show only the type of application (basic upper information). For example, gmail on smartwatch shows gmail and that's it. Earlier on Marshmallow I saw at least from whom the mail is and a subject of email. But this is probably not about the UMI but of issue new Nougat notification .
Thanks for help or idea
   Pavel
(now V7.01_20170123, before V3.02_20161017, application TRULY SmartDevice (unfortunately Mediatek SmartDevice application is nonfunctional)

tysontaps

Makaveli replied at 2017-1-28 19:59
Enter engineer mode and turn up the default value as seen in the SS. Take it up to 220 on both NB  ...

THX THX super

Airosadri

I've returned to version 20160923 because the fingerprint in this version still going crazy in my case, it's all the time trying to read without touching it and the mobile phone vibrates when I lock the screen. It´s very dissapointing that since version 20161017 the fingerprint sensor had bad functioning and that isn't solved yet despite many users have noticed that it's working incorrectly.

I've tryied all the solutions that were posted in that forum (calibration, Format all + Upgrade flashing, add fingers three times...) and any fix the problem, so, what logyc explanation exists for bad functioning if when I'm in version 20160923 works 100% correctly? I think that it's a software problem but many people said that it's hardware defection, I think that is necessary that UMI will make some software that can check that sensor because it's very strange that it works perfectly in one version and after this going completely crazy.

madalin

i flash the twrp recovery but its seen to be a problem. it isn't installed when booting to recovery mode. i received the no command

LeXuZ

Airosadri replied at 2017-1-29 01:15
I've returned to version 20160923 because the fingerprint in this version still going crazy in my ca ...

Well that is odd. With my super the fingerprint sensor works OK since nougat. With the last two versions of marshmallow I had the same problem as you.