|
Edited by Orion2017 at 2017-2-21 03:09 \n\n Edited by Orion2017 at 2017-2-21 03:05 \n\n Edited by Orion2017 at 2017-2-21 02:58 \n\n
1. Extract drivers and install.
2. Extract flash tool to desktop.
3. Place your trwp.img wherever you like
4. Open program folder and run program.
5. Deselect the first check box, then check the recovery box.
6. Click on the highlighted section, and navigate to wherever you put the recovery image. Then click download.
7. To flash, shut off phone. Plug into computer, hold down power, and volume up. Listen for notification sound. Once done, unplug, and do not power on.
Note: You must boot into recovery after flashing, or twrp will get overwritten if you allow phone to boot. Recovery= vol+up. Once you boot into recovery, you must swipe to allow modification to your system. Enjoy. Also, if your using windows 10 and can't access the MTP portion of your SDcard, I recommend installing RooTjoy, as a workaround.
Link: http://www.umidigi.com/page-ROOTJOY.html
TWRP: http://community.umidigi.com/thread-2962-1-1.html
Drivers: https://drive.google.com/file/d/0ByW...pBSUVzbUk/view
Flash Tool: https://drive.google.com/file/d/0ByW...ZRaEt0Y2M/view
SuperUser: https://drive.google.com/file/d/0ByW...8tLUd0Y00/view
|
|