UMi Rome X V3.05 (20161101) ROM - SPFT release

phil_g

I installed this but it brightened the screen so much the phone was unusable and reverted back to the earlier version

olex1984

Good day to all. This ROM has corrected the problem with the screen (stretched image on the the bottom side). But still it does not connect wifi until you unlock. I tried to change the settings: keep wifi on during sleep - always.
UNCHECK - standby intelligent power saver.
battery saver - OFF, turn on automatically -NEVER.
There are some who have this problem?

ASD

My UMI Rome X screen turned black after 15 days use. Flushed the phone  by using SP_Flash_Tool_Win_v5.1552 and version 3.05 firmware "w325_dj80umi_wcdma_20160331_songlixin_PC". But the problem is not yet solved. Still Black!! Please help!

mitkovfu

ASD replied at 2016-12-7 13:37
My UMI Rome X screen turned black after 15 days use. Flushed the phone  by using SP_Flash_Tool_Win_v ...

Use the next version of firmware /01.11.2016/ -
Rome X V3.05 (20161101) ROM - SPFT release
If the problem isn't solved - ask the service help/it seems hardware problem - display etc...../.

altillo21@55

Hi when I put this new ROM the mobile does not turn on and I have had to go back to the previous version that may be due to this failure?

misiek1

Wifi is going off with screen off, nothing is fixed. Also colours of screen changed, are brighter now.
So what  this rom really fix, any specification ?
When you fix the wifi sleep issues ?????????????????????????????????????????????????

MarcinP

misiek1 replied at 2016-12-19 18:40
Wifi is going off with screen off, nothing is fixed. Also colours of screen changed, are brighter no ...

Please go to settings - wi-fi - top right three dots - advanced - keep wi-fi on during sleep - always.
Please go to battery saving mode and check incase you have some battery mode activated which causes Wi-Fi to switching off.

misiek1

MarcinP replied at 2016-12-20 03:03
Please go to settings - wi-fi - top right three dots - advanced - keep wi-fi on during sleep - alw ...

Hello, this doesn't work at all. There is internal bug in the kernel. Wifi always on. no battery saver, but something switching wifi or 3g off after a few minutes when screen goes off. I tried all applications like wake locks, wifi keep on etc from android play store- no success. Please fix this bug, is known from beginning of the umi rome.

michalrus

Hi!

So I wanted to install TWRP onto a phone with a newer LCD—one that needs this updated firmware.

After flashing twrp.img as the new recovery.img, and choosing “recovery” in phone’s boot menu, I’m getting back to the standard “Android System Recovery”, and TWRP is not launched.

How could this be solved?

michalrus

Hey,

I managed to solved this. So basically you have to repack recovery-twrp.img and make it use the kernel (zImage) from this ROM, 20161101.

Also, if you’re trying to flash CM, later, you have to repack its boot.img in the same way (substitute its zImage with this one, from 20161101).