Proximity sensor does not work

decmachine Post time 2016-10-10 00:26:17 | Show all posts [Copy link]
1 1195
View: 1195|Reply: 1

Proximity sensor does not work

[Copy link]

8

threads

30

posts

169

credits

Senior Member

Rank: 2

credits
169
Post time 2016-10-9 17:49:43 | Show all posts |Read mode
Proximity sensor does not work. I tried to calibrate the sensor and gives me error, I restarted the phone and still not working.
When making a call and approach the face to talk, the screen is always on.  What can happen ?
Post time 2016-10-10 00:26:17 | Show all posts
Hi,

To rule out the possibility of an existing software error, I suggest you to flash your phone with SP Flash Tool, choosing the 'Firmware Upgrade' option in the flasher application. That process will completely rewrite the whole software content of your device. - You will lose your user data.
Link: http://community.umidigi.com/thread-4798-1-1.html
If that doesn't help, I suggest you to contact your reseller to (according to their warranty policy) make your phone repaired or replaced. There's a rubber piece with 2 holes between the sensor and the front face of the phone and that part might be moved from its position, covering the sensor. However, that's just one possibility, so if it's not a software bug at you, your phone should be checked by a repairman.
We are sorry for your inconvenience.
You have to log in before you can reply Login | WELCOME TO UMIDIGI COMMUNITY

Points Rules

Quick Reply Top Back to list