Super V3.02_20160923 ROM - SPFT + OTA release

JanRosak

JanRosak replied at 2016-9-29 20:47
Hey, hello..
after OTA instalation there is one issue. I can't receive sms.
I found it out, when my ...

Probably I found solution in other forums/topics.
I don't use default app for SMS, when I putted app to White list in settings/background task clear. Same problem I had with email client and same solution worked. These apps simply didnt work in lockscreen anymore. Strange that before OTA I had no problem with this behaviour.

marcus

Framemanager replied at 2016-10-1 06:38
Hello,
impossible for me to make an update in FOTA. Umi “euro” reboot with 18% then it begins the ...

Hi,

Please try the following tasks in order until you get successful. So if step 1. doesn't give you the success, go to step 2. and so on.
1. Clear the cached data in Settings --> Storage & USB --> Internal storage.
2. Make at least 1GB free space on the internal memory before starting the update process.
3. Remove the memory card from your phone (if one is installed)  and try again.
4. Process a factory data reset in Settings --> Backup & reset.
5. Flash the updated ROM with SP Flash Tool that you can find here.

With the previous update I solved remeìoving the memory card.
Now I have the same problem with the new update. I try without memory card.

volfsboy

\n\nhi.
i have a umi super for 3 months. this phone is very good. and very beautiful.
but !!!
the new update V3.02_20160923  for umi super is very vary bad !!!
in this update finger print sensor is work too slowly !!! and unlock very slowly. and finger print sensor is Vibrations 3 time after unlock.
and
finger print unlock incompatibility with screen off application.
after update finger print sensor is need pin code to unlock.and Low sensitivity of screen after update.

volfsboy

\n\nplease help me

marcus

Framemanager replied at 2016-10-1 06:38
Hello,
impossible for me to make an update in FOTA. Umi “euro” reboot with 18% then it begins the ...

Hi,
now I've made the last update with success after having removed the sd memory card.

MarcinP

volfsboy replied at 2016-10-2 00:05
Edited by volfsboy at 2016-10-2 00:13 \n\nhi.
i have a umi super for 3 months. this phone is very g ...

Hi
I can confirmed that something different is now with finger print sensor, as in previous softwares versions when you touch sensor with correct finger screen was switching on way quicker and phone wasn't vibrating, just was vibrating when you used wrong finger to informed you of error in unlocking ( which this option was the best). I don't have problems with finger print unlocking but is slower and something is wrong with vibration.

MarcinP

\n\nGuys from UMI
Thanks for improving system but please not fixing something what is working fine. There was no need fixing finger print sensor as was working very well. Please just focus on fault which customers complaining.
1. Thanks for change camera app (please fix color balance etc as some customers still have some issues)
2. Please come back in to finger print sensor previous versions as nothing was wrong with it.
3. Please change loudness of speakers as some customers (and I confirm that could be louder)  complained of low volume
4. Please fix sensitivity of light sensor in darker condition
5. Please fix sensitivity of screen when is not in hand and is on table etc
6.  I would recommend you to base new  software on 3.01 20160708 as this software have not issue with finger print sensor, touch sensitivity just if you could add this new camera app with small improvements would be nice
7. Add to shortcut list Hotspot (tethering),  remove one of the Sim data shortcut or update list for system UI tuner
8. Add option for battery percentage on top bar
9. Switch off this stupid battery saver which is switching off camera flash when battery is less than 15% but you are able to switch on torch. This setting doesn't have any sense.
Guys my proposition is write faults in list is just easier to understand and confirm with other users.

Framemanager

marcus replied at 2016-10-1 23:37
Hi,

Please try the following tasks in order until you get successful. So if step 1. doesn't give ...

Thx but that didn't work for me (to step 4)

Pfff, last solution is flashtool...
But i think that all my phone will be erased ?
Yes of not
Thx

q1t1

Nope, I flashed the new firmware with flashtool, and I don't select recovery, cache and userdata.
Then I wiped caches in twrp.
No data loss

Faera

Hi there,

Is it possible to make a secure boot.img compatible with this rom? As the old one from 0616 http://community.umidigi.com/thread-3512-1-1.html does not work any more as it messes up the touch drivers. Thanks!